How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tool Hut Your Own Question
Tool Hut
Tool Hut, ASE Certified Technician
Category: Pontiac
Satisfied Customers: 551
Experience:  Owner of a mobile diagnostics company assisting auto technicians with difficult vehicles
77480539
Type Your Pontiac Question Here...
Tool Hut is online now
A new question is answered every 9 seconds

Pontiac Grand Am: Changed my fuel pump but now car won't start,

Customer Question

Changed my fuel pump but now car won't start, getting fuel @ bleed point on fuel rail. When I started the job I pulled the pump relay while car was running to relieve fuel pressure on the system. Just read where I was supposed to use the bleed point on fuel rail to relieve pressure.
Submitted: 2 years ago.
Category: Pontiac
Expert:  Tool Hut replied 2 years ago.
Need some more details. What kind of car is this? Were there any wires that needed to be redone?
Expert:  Tool Hut replied 2 years ago.
Do you have a fuel pressure gauge? It would be helpful to know what your fuel pressure is. Where did you get your pump?
Expert:  Tool Hut replied 2 years ago.
Did you figure anything out?