How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JHoop Your Own Question
JHoop
JHoop, Pontiac Technician
Category: Pontiac
Satisfied Customers: 5446
Experience:  14 Year Engine Builder,16 years as a Tech HvyLine, Suspension, Electrical, Brakes, 6 Year Shop Owner
4700517
Type Your Pontiac Question Here...
JHoop is online now
A new question is answered every 9 seconds

How to put the serpentine belt back on a 1997 Pontaic bonneville

Customer Question

how to put the serpentine belt back on a 1997 Pontaic bonneville
Submitted: 7 years ago.
Category: Pontiac
Expert:  JHoop replied 7 years ago.
Hello , my name isXXXXX you for choosing justanswer.com.

What is the 8th digit of the VIN #?
Customer: replied 7 years ago.
the 8th digit of the vin is K
Expert:  JHoop replied 7 years ago.
Gotta ya.

I uploaded the procedure in .pdf format here to justanswer. You can download it by clicking HERE.

I hope this helps you.

If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JHoop
JHoop and other Pontiac Specialists are ready to help you
Customer: replied 7 years ago.
do you have to take the motor mount off
Expert:  JHoop replied 7 years ago.
Yes


The lateral mount must be removed.
Customer: replied 7 years ago.
how do i do that is there a diagram ?
Expert:  JHoop replied 7 years ago.
You need a floor jack to support the engine.

Then follow THIS.
Customer: replied 7 years ago.

Ok I have a floor jack, but nothing was there when I clicked on your next direction

Expert:  JHoop replied 7 years ago.
There is a nut under the mount.

There is maybe two bolts on top of the engine bracket mount.
Customer: replied 7 years ago.
OK I will try this and get back to you
Expert:  JHoop replied 7 years ago.
I'll be here. Thanks again, JHoop
Customer: replied 7 years ago.
there is a bolt on the top of the engine mount that is loose, but will not come out because there appears to be someyhing on the othet end of it, but the other end is inside of the engine wall. Any suggestions?
Expert:  JHoop replied 7 years ago.
HERE is the removal of the mount.