How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Mechanical Contractor
Category: Plumbing
Satisfied Customers: 22634
Experience:  State Licensed Mechanical Contractor
Type Your Plumbing Question Here...
Billy is online now
A new question is answered every 9 seconds

U sure of my problem with the water heater Zanker Minitherm

Customer Question

Hi,i'm Steven Are u sure of my problem with the water heater Zanker Minitherm MDI6000. Water flow is ok but no heating.
Submitted: 1 year ago.
Category: Plumbing
Customer: replied 1 year ago.
in the beginning, the heating effect is normal. But water flow is slow. I inject air jets into the pipes., water flow is normal. But no more heating effect. I have no user manual of this heater. I doubt it the heating control strips attached to the pressure sensor is not working properly, or a refinement of the metal strip contact position will fix the problem?
Customer: replied 1 year ago.
Do you need photos to assess the problem?
Expert:  Billy replied 1 year ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying.