How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc, General Contractor
Category: Plumbing
Satisfied Customers: 921
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
Type Your Plumbing Question Here...
Machinc is online now
A new question is answered every 9 seconds

I have a geospring water heater that will not power up, it

Customer Question

I have a geospring water heater that will not power up, it is 1.5 yrs old. I have tried resetting the breaker and the red button thermal limit under the top cover. I also have checked and there is proper voltage what else can i try?
Submitted: 2 years ago.
Category: Plumbing
Expert:  Machinc replied 2 years ago.
By checking proper voltage did you
mean at the heater or to the heater?
If you mean no power at all ( can't check mode)
check the connections at the heater
Test voltage at the connection on heater
for proper voltage 120 each leg
220/240 from leg to leg
If voltage is good trouble is in
heater and will need to be professionally