How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick, Construction Supervisor
Category: Plumbing
Satisfied Customers: 21799
Experience:  Licensed Master plumber with 40+ yrs. experience.
Type Your Plumbing Question Here...
Rick is online now
A new question is answered every 9 seconds

I have no water in my house, we are on a well. I have checked

Customer Question

I have no water in my house, we are on a well. I have checked the breakers they are ok. the water tank gauge reads 0, when I tested the valve on the tank it had 20 psi. what could be my problem
Submitted: 2 years ago.
Category: Plumbing
Expert:  Rick replied 2 years ago.
The first thing to check is the breaker in the electrical panel. If the well pump breaker is not tripped then you could have a bad (or clogged ) pressure switch or a bad pump maybe even not enough water in the well (this is the least likely).