How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg A. Your Own Question
Greg A.
Greg A., Engineer
Category: Phone Systems
Satisfied Customers: 2743
Experience:  Working with Electronics for 25+ years.
Type Your Phone Systems Question Here...
Greg A. is online now
A new question is answered every 9 seconds

KX-GTE230 Base W,4KX-TGE-20 handsetsI have just installed

Customer Question

KX-GTE230 Base W,4
KX-TGE-20 handsets
I have just installed the aboove set. It seems to be working as you intended. This is in my home This set replace a Pansonic set that was
using 2 line. I had moved into my home which has one 1 line only.
When calling this new address, my andsering machine says "this answering machine is full." This was the same problem I was having with the replaced 2line unit. My question? How do I turn off answering
message as if I did not have one?
Bill Johnson
Submitted: 2 years ago.
Category: Phone Systems
Expert:  Nathan replied 2 years ago.
Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority. Sorry to hear you’re having trouble, Bill.
Expert:  Nathan replied 2 years ago.
Do you see any indication on the panasonic that these messages (that are causing the memory to be full) are there and available to listen to on the panasonic, or is that panasonic memory empty?