Oldsmobile Questions? Ask a Mechanic for Answers ASAP
I am sorry your having this problem
there are 2 ways to kill the passlock system in this car
one sometimes works but its worth a shot
you need to pick up a 2.2 ohm resistor and at the passlock sensor cut the black wire and the yellow wire and add the resistor between the 2 wires and see if it will run
if it will not then the only other way is to send out the computer to these people here and they can remove the passlock programming from the computer so the computer does not have the passlock system in it anymore
also most of these that are in passlock lock and will not come out are cause by a bad passlock sensor built into the outer ignition lock case and alot of times replacing that will correct this issue
if by a rare chance it does not then there is a bad BCM and a few rare issue of bad computers causing this passlock issue
you can always get me back through this post for free anytime with any follow up with this question even after you rate us here at Justanswer !
dont forget to rate us here !