How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ElectronicsPete Your Own Question
ElectronicsPete
ElectronicsPete, Engineer
Category: Office Equipment
Satisfied Customers: 17932
Experience:  Electronic Engineer
30970729
Type Your Office Equipment Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

I have a Minolta c200 when I use the doc feeder on one side

Customer Question

I have a Minolta c200 when I use the doc feeder on one side the image on the paper is skewed > Have cleaned the feed section and tried most settings. Any Idea??
Submitted: 2 years ago.
Category: Office Equipment
Expert:  ElectronicsPete replied 2 years ago.
Hello,
I am Pete, and I'll be happy to assist with your question today.
The sheet is being fed in at an angle. This is due to a problem with the doc feeder.
If cleaning the rollers did not help, then they may be worn and are not gripping the paper evenly, so will need to be replaced.
Customer: replied 2 years ago.
No, the paper is not going in or out on an angle. I am a copier tech and this one has got me. Are you a copier tech? I have the service manual and there is nothing in there about this. I know I am not the first person with this problem on a Minolta c200. Any other suggestions?
thanks
Terry
Expert:  ElectronicsPete replied 2 years ago.
Hi Terry, yes, I have repaired many copiers and printers. I will see if another expert has any ideas on this one.
Customer: replied 2 years ago.
Hi Pete
Have not heard back for you.
You said that you will see if another expert has any ideas on this one.
Have you found out anything?
Terry
6/26/15 3:45pm eastern time
Customer: replied 2 years ago.
Hi Pete
Have not heard back for you.
You said that you will see if another expert has any ideas on this one.
Have you found out anything?
Terry
6/26/15 3:45pm eastern time