Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
My 2004 Nissan Altima has been to the dealership 4 times. I
My 2004 Nissan Altima has been to the dealership 4 times. I can let it set for 3 or 4 days and it will crank and run perfect as long as I don't shut it off. When I do cut it off, it won't start for a … read more
Marc
Marc
Mechanic
Associate Degree
1,150 satisfied customers
Stalling at intersections. No check engine light. Stalls at
No check engine light. Stalls at idle or when slowing down to idle. … read more
Mechanic01
Mechanic01
9,652 satisfied customers
I have a 06 Nissan Altima 3.5 and I am still getting code
I have a 06 Nissan Altima 3.5 and I am still getting code p0011 I changed cam shaft senser and changed oil and filter and it still came back with code … read more
Chris(aka-Moose)
Chris(aka-Moose)
Nissan Technician
Vocational, Technical or Trade School
982 satisfied customers
Ron. After putting a new VVT solenoid in the 2014 Nissan
Hi Ron. After putting a new VVT solenoid in the 2014 Nissan Altima with no change in the running I changed the oil as recommended. The car ran great with no problems. After sitting all night, my daugh… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
648 satisfied customers
My daughters 2013 Nissan Altima has a p0011 engine code. I
Hi Chris. My name is***** daughters 2013 Nissan Altima has a p0011 engine code. I replaced the VVT solenoid but the car is still stalling and not idling correctly. Not sure what would be next to corre… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
648 satisfied customers
I have nissan altima 2002, 2.5lt. I have code P0011 and
I have code P0011 and P0340, I change CAM, Crank sensor , VVT, variable solenoid, PCM, CAM conector, I clean CAN shaft, and the other think is I Buy CAM sensor in auto zone, NAPA, and dont start, I buy in orreyli and start but become code P0340, I buy hitachi sensor and wont start, I put again Orreyli sensor and start but retur code … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,123 satisfied customers
P0011 code on 2014 Nissan Altima 2.5 camshaft position
P0011 code on 2014 Nissan Altima 2.5 camshaft position actuator a bank 1 timing over advanced … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,749 satisfied customers
Altima: Have an 04 Altima 2.5. Recently experienced issue
Have an 04 Altima 2.5. Recently experienced issue where idle drops to about 300, & stumbles. May or may not die. Sometimes stumbles at speed on highway. Replaced throttle body & just replaced fuel pum… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
648 satisfied customers
350z: Just replaced my vq35de and I have reoccurring codes
Just replaced my vq35de and I have reoccurring codes for advanced cam timing and for idle air control. I know the vvt solenoids are good because they came of a running motor. Did an oil change during … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,697 satisfied customers
G35: My 2008 Infiniti G35 will occasionally stumble and sometimes
My 2008 Infiniti G35 will occasionally stumble and sometimes stall at low speed. I check to see if a code had occurred, but no codes were present.… read more
Ted G.
Ted G.
Sales Manager
Vocational, Technical or Trade Scho
5,682 satisfied customers
sentra: we have a 05 sentra 1.8L that we did a head gasket
we have a 05 sentra 1.8L that we did a head gasket repair w/o locking the intake cam gear. After repair we got a code p0011 over advance. so question is ... did we damage the gear or can we reset to m… read more
Jake
Jake
5,508 satisfied customers
g35: I have a 2007 g35s. I replaced my spark plugs and cleaned
I have a 2007 g35s. I replaced my spark plugs and cleaned the throttle bodies carefully. I am getting the fluctuating high idle. I did as you said and disconnected the mafs and throttle bodies wires. … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,697 satisfied customers
Altima: I have a 2003 nissan altima 2.5 S, which has an error
I have a 2003 nissan altima 2.5 S, which has an error code of P0340. I think this should be the camshaft and crankshaft position sensors. Then I went to the auto repair, who failed to fix the problem … read more
Anthony
Anthony
ASE Certified Technician
Vocational, Technical or Trade Scho
332 satisfied customers
2004 Murano - P0011 Engine Light Code along with clicking noise
2004 Murano - P0011 Engine Light Code along with clicking noise (like diesel valves) going on and off… read more
pETER
pETER
technician
Master's Degree
136 satisfied customers
2000 Nissan Maxima SE has hard shift during firm acceleration
2000 Nissan Maxima SE has hard shift during firm acceleration from 1st to 2nd gear. Hesitation from 1st to 2nd gear when acceleration is slow (as in a parking area). No other shifting issues. Transmis… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,697 satisfied customers
I have a 2004 Nissan Titan SE. More often than not, when I
I have a 2004 Nissan Titan SE. More often than not, when I start the engine, it will start fine but then within 1 second the engine immediately idles down and dies. Sometimes it won't die, but will id… read more
Jason
Jason
Toyota Service Technician
Associate Degree
106 satisfied customers
03 altima: litre..speeds..slow down..I accelerate it will lose power
I have an '03 altima 3.5 litre. Twice in two months I have been driving at speeds between 35 and 50 and the car seems to fall out of gear and has no power or acceleration. If I slow down it seems to g… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,906 satisfied customers
Cold Air Intake..car is stalling (shutting down) intermittendly
Yesterday I installed a Nismo (AEM) Cold Air Intake. The installation seem to go fine, and on repeat inspections, everything seems to be together. However the car is stalling (shutting down) intermitt… read more
Roy
Roy
ASE Certified Technician
Vocational, Technical or Trade Scho
8,006 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

982 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

646 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,906 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

648 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x