Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
I have a 05 nissan titan won't shift from 4th to 5th i read
I have a 05 nissan titan won't shift from 4th to 5th i read that it is the Turbine Revolution Sensor so I changed the valve body it came out of a working transmission of the same type re5r05a that was… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
24,102 satisfied customers
My 2005 Nissan Frontier was showing solenoid codes p1769 and
My 2005 Nissan Frontier was showing solenoid codes p1769 and a couple others replace the valve body and now it is showing a p1716 … read more
Richard Greer
Richard Greer
Online Automotive Repair Consultant
Vocational, Technical or Trade School
1,254 satisfied customers
I have two codes. P0420 and P1716. I have already deduced
Second opinion] I have two codes. P0420 and P1716. I have already deduced that for P0420 I might just need to replace at least one of the oxygen sensors... but which one? Or should I do all of them. T… read more
Roy
Roy
shop foreman
Associate Degree
5,396 satisfied customers
Stuck in 4th gear, shifting to reverse has a hard shift. Try
Stuck in 4th gear, shifting to reverse has a hard shift. Try to shift the gears manually wont shift out of 5th. Driving home from work it feels like it shifts between 4th and 5th. … read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
24,102 satisfied customers
Will the vss stop my nissan patfinder from shifting into 3rd
will the vss stop my nissan patfinder from shifting into 3rd or 4th … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,014 satisfied customers
My 2016 Titan XD 7-speed automatic will not upshift from 4th
My 2016 Titan XD 7-speed automatic will not upshift from 4th if you are cruising steady at 40 mph or under. In other words, if you're in a 40 mph speed zone, you are in 4th the whole time. Once you hi… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,202 satisfied customers
Nissan/Datsun patfinder LE: Hello Chris---ref question of
Hello Chris---ref question of 5-20-14 I've got some info from a service manual that I need to verify. I was reviewing the gear ratios you mentioned. The 5th ratio of .0389 seemed very low. And at same… read more
Chris(aka-Moose)
Chris(aka-Moose)
Nissan Technician
Vocational, Technical or Trade School
921 satisfied customers
xterra: Hi, I'm Steve owner AAMCO in Longview Tx. After rebuild
Hi, I'm Steve owner AAMCO in Longview Tx. After rebuild which included the control valve assembly we have a reoccurring 1716 code that will resent after about 8 miles. We replace the control assembly … read more
Jake
Jake
5,317 satisfied customers
Infiniti/Nissan Qx56/Armada: I have a 2005 Infiniti QX56 and
I have a 2005 Infiniti QX56 and it does not shift into 4th gear. One mechanic said the computer reads the turbine sensor but didn't know if it was the sensor itsself or possibly a short in the wire or… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
24,102 satisfied customers
1995 Nissan Pickup, 4x4, 4 cyl, manual transmission stuck in
1995 Nissan Pickup, 4x4, 4 cyl, manual transmission stuck in 5th gear. Truck will start with clutch pedal pushed in like normal, but when released, truck stall do to being in gear. Shifter does move t… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,546 satisfied customers
2002 Nissan Frontier: speed manual..5th..shifting..~ 24 mpg
I have a 2002 Nissan Frontier Pickup 5 speed manual, 102,000 miles Very loud in 3rd and 5th gears Not loud in 2d or 4th gears No trouble shifting or with clutch Continue to get ~ 24 mpg (has not chang… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
Infiniti Qx4: 40 mph..the freeway under heavy acceleration..overdrive
Hi! I own a Infiniti Qx4 the Transmission shifts fine in the city between 5 and 40 mph. When getting on the freeway under heavy acceleration it shifts perfectly, but after you reach the desired speed … read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
25,738 satisfied customers
2010 Infiniti EX35: AWD..a car going 60 MPH and I..accelerator..faster
I have a 2010 Infiniti EX35 AWD Jouney and it has a 6-speed electronically controlled transmission !!! Here is the problem : If I'm following a car going 60 MPH and I want to pass I hit the accelerato… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
25,738 satisfied customers
1996 Nissan: SE..5th gear was blocked off..previous owner..linkage
1996 Nissan 200 SE R 5-spd has shifting problem. Can not get into 1st or 2nd....only 3rd and 4th as 5th gear was "blocked off' with plywood by previous owner. Does it sound like a linkage problem? Tha… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
25,738 satisfied customers
2003 G35: auto trans..5th gear, with some slipping in 4th
My 2003 G35 w/auto trans. all of a sudden has begun to slip in 5th gear, with some slipping in 4th. Milage is 85,000. Has the trans. bit the dust or might there be an electronic problem? Cost???? Than… read more
Ryan
Ryan
Master Infiniti Tech
Associate Degree
1,420 satisfied customers
Cant get into 1st,2nd gear, or reverse..3rd gear..5th
Can't get into 1st,2nd gear, or reverse. Stick shift is very loose, although you can drive by starting in 3rd gear. Once the car has reached a higher speed in 3rd gear, it shifts properly going into 4… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
transmission problem..slipping 1 st and reverse..Malfunction
I have a transmission problem where it started with slipping 1 st and reverse, then everything worked fine except for 4th and 5ft gear. I checked the error code and I had a P1716 (manufacturer control… read more
Roy
Roy
Vocational, Technical or Trade Scho
7,422 satisfied customers
1990 p/u, 5-speed manual 2-wheel drive, 4 cyl..original clutch works
I have a 1990 p/u, 5-speed manual 2-wheel drive, 4 cyl that has 290650 miles on it. I bought it new and the transmission won't shift into reverse, I still have all 5 forard gears and the original clut… read more
AutoTech08
AutoTech08
Workshop owner
Vocational, Technical or Trade Scho
676 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

921 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

630 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

202 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,761 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

625 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x