Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
2003 Nissan Maxima. Codes p2122,p2722 Replace throttle body
2003 Nissan Maxima. Codes p2122,p2722 Replace throttle body and accelerator pedel position sensor (sensor only) still in limp mode and still no gas pedal. Checked all wires and connection Every thing … read more
Eric
Eric
Retired
N/A
38,776 satisfied customers
I have a 2008 Xterra, It runs fine when cold, but after
Hi, I have a 2008 Xterra, It runs fine when cold, but after warming up the engine still revs but accelerates slowly. Last month I had done the bypass, scared of getting the SMOD. I did also try and cl… read more
Roy
Roy
Vocational, Technical or Trade Scho
7,456 satisfied customers
Have 2008 nissan titan, was getting a p1757 code front brake
have 2008 nissan titan, was getting a p1757 code front brake solenoid...I dropped the valve body and checked the tcm for a the dreaded broken trace but it was fine, I did replace the solenoid but stil… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,017 satisfied customers
On this 2004 Camry when I take off it surges up and down.its
Hey man on this 2004 Camry when I take off it surges up and down.its not slipping it's just taking off it like it surging up and down… read more
Tyler Henry
Tyler Henry
Automotive service technology
3,247 satisfied customers
2010 Altima service engine came on went into limp mode
2010 Altima service engine came on went into limp mode showed a tps code. Replaced the sensor on the gas pedal , still limp mode showing 5 codes. P2101 P2119 P2135 P0123 P0223… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,695 satisfied customers
2007 Nissan Altima 2.5 won't go when I put it in drive. I
2007 Nissan Altima 2.5 won't go when I put it in drive . I have no response when I rev it up . Like it's in limp mode… read more
internal88
internal88
Product Manger
Bachelor's Degree
3,390 satisfied customers
I cant figure which way to line up the factory wires in the
I cant figure which way to line up the factory wires in the right order on throttle body sensor plug in connector harness I don't know which colors go into the pinout lol … read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
I have a 2004 Nissan Maxima and never had an engine light
Hello I have a 2004 Nissan Maxima and never had an engine light come on but car went into fail safe mode stuck in 5th gear. My tranny guy changed the valve body and thought this would fix and it didn'… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,013 satisfied customers
2003 Altima in limp mode #1 sensor code coming up. will this
2003 Altima in limp mode #1 sensor code coming up. will this cause the motor to go in limp mode. no throttle when it starts to get warm … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,013 satisfied customers
I have a 2005 Altima 2.5 that I am having an issue with.
Hi Mike, I have a 2005 Altima 2.5 that I am having an issue with. Last fall the a/c would not come on due to a faulty refrigerant pressure sensor. In the process of troubleshooting the problem I tried… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
350Z: Mike, I have just bought a 2003 350Z from my brother-in-law.
Hi Mike, I have just bought a 2003 350Z from my brother-in-law. the car had been standing, but he charged the battery before I got there and started fine. Drove home 70 miles - all fine until the next… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
sentra s: I have a 2006 nissan sentra s with a 1.8 4 cylinder
I have a 2006 nissan sentra s with a 1.8 4 cylinder engine. The car is in limp mode. the check engine light came and gave me a code to replace the catalytic converter, I did that, it was still in limp… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,013 satisfied customers
I have a 04 Nissan 350z. Recently my z's fan motor blew
I have a 04 Nissan 350z. Recently my z's fan motor blew which caused the battery voltage to drop pass 8 volts which then forced the car into limp mode. I have since replaced the fan motor but my car h… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,017 satisfied customers
2008 altima: would not go above idle..neutral engine still not rev up
while driving 2008 altima with 2.5 L engine , engine dropped to idle would not go above idle even with accelarator pushed drifted put in neutral engine still not rev up… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
Nissan: service engine soon..the accelerator pedal..rogue..2008 model
The" service engine soon" appears when the ignition is turned on making the accelerator pedal inactive.i want a step by step approach to solve this problem.The vehicle is nissan rogue 2008 model.want … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,013 satisfied customers
Sentra: gas pedal..plug maf sensor start car im in limp mode plug..dtc
ihave a 02 sentra with i was driving my idle rpm was steady at 1500 rpm light turn green i go and my ses lights comes and my gas pedal dont work i fully press it and rpm goes up slowly so i put over a… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
2003 Nissan Sentra: car ran..highway speeds..occasionally..limp mode
I have a 2003 Nissan Sentra with a 2.5 liter engine. I had codes P0507 and P1128 the car ran good, Idle through highway speeds. However occasionally it would go into a limp mode. I turned the engine o… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
my 2005 nissan 350z goes into limp mode when started. it has
my 2005 nissan 350z goes into limp mode when started. it has happended twice since this past friday. The two times that it has went into limp mode, the "SLIP" and "TCS" gauge lights light up. Once the… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
24,013 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

921 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

630 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

202 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,761 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

625 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x