Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
1988 Pathfinder with VG30 throttle body injection, 5spd 4x4.
Second opinion] 1988 Pathfinder with VG30 throttle body injection, 5spd 4x4. High idle, (1200-1800rpm), when started, then wants to die when engine warm. Also low on power and stutters when revved abo… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,507 satisfied customers
New maf sensor now getting p0300 and stft1 is at positive 25
New maf sensor now getting p0300 and stft1 is at positive 25 bank 2 stft2 is at -25 at 2800 to 3k rpm. Reading anywhere from -2 to 5 at idle on both banks … read more
Jake
Jake
5,273 satisfied customers
Just replaced. battery.starter.2001 Nissan Maxima sprayed
Just replaced . battery.starter.2001 Nissan Maxima sprayed throttle cleaner. mass flow cleaner when we took intake apart.now it starts and idles however it won't rev up over 2.5 rpms… read more
Jake
Jake
5,273 satisfied customers
2011 Nissan Altima 2.5S 135,000 miles About a month ago
2011 Nissan Altima 2.5S 135,000 milesAbout a month ago while accelerating from a stop the car started jerking badly as I pressed the accelerator to gain speed. I pulled over in a parking lot and tried… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
20,076 satisfied customers
Wife hit a curb with the driver side wheel on my 2011 Nissan
Wife hit a curb with the driver side wheel on my 2011 Nissan Altima. All I was able to see was a bent strut. I replaced the strut assembly. But I now hear a whirring doing that gets pretty loud at abo… read more
Jake
Jake
5,273 satisfied customers
I have a 2003 Nissan Altima with the 2.5L engine and
Hi, I have a 2003 Nissan Altima with the 2.5L engine and automatic transmission. The problem I am having is that the engine will not rev past 2500 rpm. As soon as it goes over 2000 the rev limiter or … read more
Jake
Jake
5,273 satisfied customers
My 2009 Nissan Murano has infrequent times of losing power -
My 2009 Nissan Murano has infrequent times of losing power - The spark plugs are fine the battery is new the oils been changed and all other liquid levels are fine … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,897 satisfied customers
I have a Nissan Altima 3.5se. All of a sudden at 2500rpms
I have a Nissan Altima 3.5se. All of a sudden at 2500rpms the engine starts sputtering. I just filled the gas tank with 87 octane. Any ideas?… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
I have a 2005 Altima 3.5. Within the past year I have
I have a 2005 Altima 3.5. Within the past year I have replaced the Throttle body due to a bad Throttle Position Sensor, the cam shaft position sensors, spark plugs, transmission control module among v… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
Nissan Murano SL 2003: Car jerks and coughs and back fires
Nissan Murano SL 2003: Car jerks and coughs and back fires and at times will not accelerate. There are times I can drive it and this does not happen. Then out of the blue it'll happen again.… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,897 satisfied customers
xterra: I've been experiencing a black smoke in my xterra 2000
I've been experiencing a black smoke in my xterra 2000 vg33 for a while. I already did several stuff, trying to correct that. But still, it is present. I have screenshots and video PID values while en… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
altima: 2002 Nissan Altima 2.5s Bought this car recently and
2002 Nissan Altima 2.5s Bought this car recently and CEL stated Crankshaft sensor has an issue and I had a code of P0507 but hasn't come back on. I replaced both crank/cam with Nissan sensors. Car wil… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
altima: good morning, i have 98 altima 2.4, it will start but
good morning, i have 98 altima 2.4, it will start but when i give it gas it dies, then its hard to restart. with spark and fuel pressure gauges connected, they both show no sign of loss. cleaned mass … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
Nissan Hardbody pickup: I have a 1997 hardbody pickup 2.4 4
I have a 1997 hardbody pickup 2.4 4 cyl, she cranks and idles fine but once you go to drive it'll do ok for a mile or so then when you press the gas it'll start to bog down and then it'll die and won'… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
2005 nissan titan: my truck..replaced with a brand new fuel pump..rev
have a 2005 nissan titan. just got my truck back from the shop because fuel pump stopped working. it was replaced with a brand new fuel pump and now, when driving, the truck wont go past 2500 rpm and … read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
6,508 satisfied customers
2000 Infiniti i30: 2500 RPMs - it bucks and shakes..MAF sensor
I have a 2000 Infiniti i30 that won't go above 2500 RPMs - it bucks and shakes and won't accelerate. It started after replaceing the MAF sensor (which was done to solve a different problem). So the MA… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,897 satisfied customers
95 nissan quest: gas pedal..the engine will stall and rev..rpms
i have a 95 nissan quest mini van. the engine will rev to 2500 rpm ok but if i hold the gas pedal pass 2500 or so rpm the engine will stall and rev back down and then back up again. the engine will no… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,897 satisfied customers
86 300zx: running fine..parked..starts fine..2500 it stalls out misses
86 300zx car was running fine parked it now it wont rev past about 2500 rpm it starts fine idles fine revs up to 2500 fine when it hits 2300-2500 it stalls out misses a bit goes down to about 1200 the… read more
Dennis
Dennis
Automotive Master Tech
Mechanical Engineer
224 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

921 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

630 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

202 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,761 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

625 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x