Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
I changed the brakes on my 2010 Nissan Titan on all 4 wheels
I changed the brakes on my 2010 Nissan Titan on all 4 wheels and now my brake pedal is soft and goes almost to the floor before starting to slow the truck. They do pump up to a harder pedal for regula… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,972 satisfied customers
I have a 2002 Nissan Frontier crew cab 4x4 changed master
I have a 2002 Nissan Frontier crew cab 4x4 changed master cylinder works good. Replaced front calipers and cannot bleed them. No fluid comes out . Lines are not plugged. What's the trick.… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,738 satisfied customers
pickup: I have a 90 nissan 2.4 replaced both front calipers
I have a 90 nissan 2.4 replaced both front calipers and rotors as well as pad rears are in good condition ... after replacing I properly bleed the brakes and still no pedal .replaced master cylinder .… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,738 satisfied customers
Nissan Titan: I just replaced the master cylinder on my 04
I just replaced the master cylinder on my '04 Titan. I performed the bench bleed process before installing it. Unfortunately, I had a tough time threading the rear line properly and the reservoir drai… read more
Ryan
Ryan
Master Infiniti Tech
Associate Degree
1,420 satisfied customers
1996 nissan maxima: rear calipers..brake fluid..left front..right rear
i had the rear calipers replaced on my 1996 nissan maxima.... they could only get brake fluid to come out of the left front and right rear bleeders.... i didnt have a problem until the units were chan… read more
Jan Andersson
Jan Andersson
Master Tech
Bachelor's Degree
809 satisfied customers
2005 Nissan Quest: brake system..rebuild..rusty piston..pads
2005 Nissan Quest. Have replaced brake system (rebuild calipers (all - front passenger side caliper had rusty piston so replaced all), pads and turned the rotters for the first time. Had a senior mome… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
15,077 satisfied customers
2003 nissan: gxe..do a break fluid change on it,and bleed the brakes
I have a 2003 nissan gxe and I need to do a break fluid change on it,and bleed the brakes. I just need some information or be told as to where I can access the correct steps and precedures for this ty… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,972 satisfied customers
2003 Nissan Altima: anything to the rotors..caliper to retract..worn
Nissan Mechanic Preferred. Brake Job Question. I did a brake job yesterday on my 2003 Nissan Altima. I only replaced the brake pads and did not do anything to the rotors. I could not figure out how to… read more
Brad
Brad
Lead Diagnostic Technician
Vocational, Technical or Trade Scho
2,361 satisfied customers
2005 Nissan Altima SE: with 3.5L engine..passenger front..rear brake
I have a 2005 Nissan Altima SE with 3.5L engine. I'm having brake problems. The passenger front and driver rear brake calipers don't work. When the brakes are applied they don't move. i tried to bleed… read more
Anthony
Anthony
ASE Certified Technician
Vocational, Technical or Trade Scho
332 satisfied customers
brakes, my brake pedal is soft and goes to the floor..fluid levels
After bleeding the brakes, my brake pedal is soft and goes to the floor. I have checked the fluid levels and they are fine. Why is the pressure not coming back.… read more
saabspecialist
saabspecialist
Auto Tech
High School or GED
294 satisfied customers
000 miles..The brake pedal is..brake system..master cylinder
I have a 1997 I-30 with 126,000 miles on it. The brake pedal is very low but will pump up with one pump to a decent height. I've had the entire brake system checked over and was told it needed a maste… read more
Ironmike
Ironmike
ASE Master ,Ford Certified Master Tech
Vocational, Technical or Trade Scho
3,475 satisfied customers
Nissan Stanza: brake pads, brake shoe..Master Cylinder..replace fuel
My car : Nissan Stanza 1990 XE. Please help me on Step by step how to bleed the brakes. How to replace brake pads, brake shoe and Master Cylinder. And also how to replace fuel injector Thanks very muc… read more
marcpod
marcpod
Own collision repair service
Vocational, Technical or Trade Scho
1,707 satisfied customers
96 Maxima: new front brakes..left rear..brake fluid..towed..wheels
Hello, 96 Maxima ODO: 57500 - new front brakes in '08; technician said rear pads were OK. My brother who does his repairs removed caliper left rear at home garage (disadvantage of working on ground). … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
1985 Nissan Maxima, 3.0 V6 FI. The brake pedal goes to the floor.
1985 Nissan Maxima, 3.0 V6 FI. The brake pedal goes to the floor. I replaced the rear disk brakes and the front pads are fine. The passenger side rear wheel brake does not work. I thought the caliper … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
4,981 satisfied customers
I JUST CHANGE A CALIPER ON A NISSAN FRONTER 2001 BREED ALL
I JUST CHANGE A CALIPER ON A NISSAN FRONTER 2001 BREED ALL FOUR LINES MORE THAN FOUR TIMES ADJUST REAR BREAKS AND CAR STILL DON BREAK… read more
Eric
Eric
Retired
N/A
37,919 satisfied customers
1997 nissan altima: replaced the front driver caliber..brakes
I have a 1997 Nizzan Altima GXE. I just replaced the front driver caliber but it is not clamping down. It's like I now no longer have brakes on that side. The passenger side went well... I bleed the l… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
Nissan 200sx: peddle..pedal..the brakes seem to work fine
I have had a few problems with my nissan 200sx (S13)s brakes. When I press the peddle it goes almost down to the floor, if I pump the pedal it hardens up and the brakes seem to work fine. when I relea… read more
Matt
Matt
Technican
Vocational, Technical or Trade Scho
108 satisfied customers
1991 Nissan: wheel drive..000 miles..master cylinder..driver side
We recently purchased a 1991 Nissan 4-wheel drive pickup with approximately 210,000 miles on it. Still runs but needed brake work. We have replaced the master cylinder, both front calipers, brake line… read more
Nissan Man
Nissan Man
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

921 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

630 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

202 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,761 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

625 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x