Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
I had a code for misfire on cylinder 5 with a rough idle so
I had a code for misfire on cylinder 5 with a rough idle so I started with the basic changed spark plug,coil pack cleaned the throttle body and MAF cleared code than idle was to high … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,557 satisfied customers
I need to replace my knock sensor on a 2000 Nissan Maxima.
I need to replace my knock sensor on a 2000 Nissan Maxima. Is there any way to do it without removing the intake manifold?… read more
Anthony
Anthony
ASE Certified Technician
Vocational, Technical or Trade Scho
332 satisfied customers
Nissan maxima: My 1991 Nissan Maxima cuts out when it gets
My 1991 Nissan Maxima cuts out when it gets warm all fuel line to injectors are clean locals are stumped… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,995 satisfied customers
Altima: How hard is it to change the 6 spark plugs in a 2003
How hard is it to change the 6 spark plugs in a 2003 Altima? Do I need special tools? Approximately how long would it take? Is there anything I should be careful of?… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
4,973 satisfied customers
2000 Nissan: going bad..low-miles..are these engines interchangable
hi there, I have a 2000 Nissan Exterra with a v6 motor going bad. I have found a low-miles 2005 Nissan Maxima v6 - are these engines interchangable?… read more
rpmdiag
rpmdiag
High school
8,963 satisfied customers
2001 Nissan Maxima: the Purge Control Valve..P0443..car cuts
How do you replace the Purge Control Valve on a 2001 Nissan Maxima - How much should I expect to pay for the part? A code P0443 is being displayed and the car cuts off sometimes at a light.… read more
Eric
Eric
Retired
N/A
37,412 satisfied customers
Nissan maxima: v6..3.0l car was idling on its own at 1 and 1.5
06 Nissan maxima v6 3.0l car was idling on it's own at 1 and 1.5 in drive. and wanted to pull when accelerating. Had idle air control valve change and still same results. Any answers or does the contr… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
94 nissan maxima: intake manifold..the gasket due to vaccum leak
hello i need the torque specs for the intake manifold on a 94 nissan maxima upper plenum im replacing the gasket due to vaccum leak… read more
BigBob
BigBob
Service Manager
High School or GED
4,792 satisfied customers
1996 nissan maxima: gas smell..cabin..fuel line under hood
1996 nissan maxima. gas smell in cabin. My mechn check fuel line under hood. no wet spot or leak. going into shop again. smell seems to be worst in the morning or when car is cold… read more
Roy
Roy
Vocational, Technical or Trade Scho
6,792 satisfied customers
How hard is it to change the spark plugs on a 2006 Nissan Maxima
How hard is it to change the spark plugs on a 2006 Nissan Maxima 3.5? The rear bank looks tough. Do I have to remove the intake manifold, and if so do I need to replace any gaskets on the manifold? Th… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
Maxima: tranny..be a bolt in to replace the 3.0 V6
Will a 1987 3.0 V6 out of a auto tranny Maxima be a bolt in to replace the 3.0 V6 in a D21 Nissan Hardbody?… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,557 satisfied customers
2003 Nissan Maxima GLE: knock sensor 2002..liter..different part..3.0L
Looking for the location and replacement procedure for knock sensor 2002-2003 Nissan Maxima GLE 3.5 liter. It is a different part than the 2002 3.0L (found lots of stuff on that one!)… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,557 satisfied customers
1995 nissan Maxima: intake manifold..the gasket..engine shut down
I have a 1995 nissan Maxima, and I remove the intake manifold collector and did'nt replace the gasket and now the engine shut down making a air noise… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
23,557 satisfied customers
Nissan frontier: knock sensor..v6..the upper intake manifold and
I cannot find the knock sensor below the intake manifold of my nissan frontier v6? I have removed the upper intake manifold and cannot find the knock sensor any where in site. Please send me pics, vid… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,761 satisfied customers
2005 maxima: nissan..V6 ENGINE..80- 100 psi at idle and rattle goes
I have a nissan VQ 35 V6 ENGINE FROM A 2005 maxima .and it has got a tappet ratle at idle or just off idle ,Oil preasure is between 80- 100 psi at idle and rattle goes out at 2000rpm most times can yu… read more
Roy
Roy
Vocational, Technical or Trade Scho
6,792 satisfied customers
2001 nissan maxima: v6..car runs rough when stopped..acceleration
2001 nissan maxima v6, car runs rough when stopped and in drive or reverse, has good acceleration and runs well otherwise… read more
mr gray
mr gray
fleet Manager
Vocational, Technical or Trade Scho
80 satisfied customers
Nissan: tricks in removing inlet system..V6..spark plugs..manifold
Any tricks in removing inlet system on Nissan VQ30 (DQ) V6 motor to access spark plugs. I have the front loose but something appears to be holding the back of manifold down.… read more
Roy
Roy
Vocational, Technical or Trade Scho
6,792 satisfied customers
Nissan Maxima: My check engine light came..egr valve
My check engine light came on and I was told my EGR valve might be clogged. I have a Nissan Maxima 1999. I was told it is very labor intensive job. I just want to make sure I am being told the correct… read more
Sam C
Sam C
Service Manager
Almost a liberal arts!
792 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

921 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

630 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

202 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,761 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

625 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x