Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
2014 Altima rough idle and stalling My 2014 Altima had codes
2014 Altima rough idle and stalling My 2014 Altima had codes P0300 and P0014 I changed my spark plugs, coil packs,, and battery but my idle is still rough … read more
Marvin K
Marvin K
Principal Test technician
Associate degree in applied science in automotive technology
29 satisfied customers
2003 Nissan Altima 2.5 SL po300 1 of 9. Cam/crank sensors
yes, cam/crank sensors fuel pump throttle body sensors … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
P0014, which solenoid is this, left or right side? 2014
P0014, which solenoid is this, left or right side? … read more
camerontech
camerontech
20 year experience diagnostic technician
class a
1,891 satisfied customers
Could a camshaft sensor make a check engine light come on
Could a camshaft sensor make a check engine light come on for a crankshaft? … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,159 satisfied customers
PO52B CODE. 2015 Nissan Altima 2.5 the code is PO52B, I just
I just had new camshafts put in an the check engine light is still on … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,159 satisfied customers
Trouble starting and rough idle. Codes indicate cam sensor 1
trouble starting and rough idle. Codes indicate cam sensor 1 is bad and cam 2 over advanced. Replaced both cam sensors and crank sensor. No change. Thoughts? … read more
Roy Sheidenberger
Roy Sheidenberger
11,434 satisfied customers
I have a 2013 Nissan Altima have a p0014, I replaced exhaust
I have a 2013 Nissan Altima have a p0014 JA: Are you fixing your Altima yourself? What have you tried so far? Customer: I replaced exhaust timing valve soinide JA: I'm sorry if I'm reading you wrong h… read more
J Hall
J Hall
retired
none
1,603 satisfied customers
I have been working on a 2012 Pathfinder S 4.0L 4WD with a
I have been working on a 2012 Pathfinder S 4.0L 4WD with a persistent P0011 Code. I have replaced the VVT Valve and the camshaft position sensor after first having changed the oil and filter. No evide… read more
shawn24_91
shawn24_91
Automotive Technician
Associate Degree
334 satisfied customers
I get error code P0014 on my 2011 Juke. 87,000 miles. The
The Camshaft Position Actuator is a device mounted to the front of the engine's Camshaft. It operates by oil pressure and a signal from the Powertrain Control Module (PCM) to advance valve timing (it opens the intake valves sooner) for better engine performance under acceleration. In this instance the valve timing has been over-advanced holding the valves open too long. The PCM recognizes this fault and turns on the Check Engine Light and sets the trouble code. The vehicle's driver may notice engine performance problems. The problem could be related to a faulty Camshaft Position Actuator, too much oil flow from the actuator for too long a period of time, wiring problems, etc. The valve timing system is very sophisticated and needs to be fully diagnosed by a qualified repair facility. I want to have it fixed. When I brought it into the dealership they ignored the code and says the juke was 2 qts low on oil?!!! … read more
Chris Carr
Chris Carr
Ase Master
Ase Master Tech
463 satisfied customers
I'm working on a 2015 Nissan Murano 2.5 4 cylinder runs
I'm working on a 2015 Nissan Murano 2.5 4 cylinder runs rough I'm getting a trouble code poo11 intake Valve timing control B1 I check the oil it's been change and clean could it be both top sensors th… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
P0011 code on 2014 Nissan Altima 2.5 camshaft position
P0011 code on 2014 Nissan Altima 2.5 camshaft position actuator a bank 1 timing over advanced … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25,003 satisfied customers
I have a 2002 Nissan Altima 3.5 v6 with 170000 mi car runs
Hello again I have a 2002 Nissan Altima 3.5 v6 with 170000 mi car runs good but has one code POO11 a camshaft position timing over advanced or system performance bank 1 can you please tell me how to c… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
Altima: 2003 Nissan Altima 3.5L i have p0345 code and occationaly
2003 Nissan Altima 3.5L i have p0345 code and occationaly i see the catalytic convertor code come on. what is the problem here with this code and what do i need to fix? My car is hard to start occatio… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
I have a 2003 Nissan Altima 3.5 with cam over advance code
I have a 2003 Nissan Altima 3.5 with cam over advance code bank 1 and 2. the car hasn't lost any power, isn't hard to start either is there a misfire… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
nissan maxima: i have a 2004 Nissan maxima, tues evening driving
i have a 2004 Nissan maxima, tues evening driving it home the check engine light on. these are the codes I pulled p0011, p0303, p1611, p0011. yesterday morning I went out to start the car and it only … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
2002 altima: litre..accelerate..it misfires and stays there..gas pedal
2002 altima, 2.5 litre, auto. The engine will accelerate to around 4000 rpm, then it misfires and stays there. It will not go any higher in rpm and it does not decrease in rpm unless you let off the g… read more
Brad
Brad
Lead Diagnostic Technician
Vocational, Technical or Trade Scho
2,361 satisfied customers
The plugs but have a random misfire and camshaft advanced reading.
changed the plugs but have a random misfire and camshaft advanced reading.. what could it be… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,275 satisfied customers
2006 altima: V6..ive replace 3 rear cam position sensors
I have a 2006 Altima 3.5 V6 and I've replace 3 rear cam position sensors in the last 2 months are you aware of any problems regarding the sensors?… read more
Roy Sheidenberger
Roy Sheidenberger
11,434 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,065 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

10,081 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

706 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

93 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x