Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Nissan Questions
Xterra: 2000 Nissan xterra ran hot head gaskets replaced
2000 Nissan xterra ran hot blown head gaskets replaced head gaskets now engine run but switches from open lope to closed lope then fuel system fault get a knock sensor code and muti cycliner miss fire… read more
mike switzer
mike switzer
728 satisfied customers
1998 nissan crank but want run , change dist cap plug
change dist cap plug an rota fuel pump test goog want start … read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
Sentra GLE: I have a 95 Nissan Sentra the fuel pump went out
I have a 95 Nissan Sentra the fuel pump went out so I replaced it now the vech won't start pleanty of fuel no spark then three codes came up PO 100 , PO 136 , and PO 500 was told it could be the ECU H… read more
Jake
Jake
311 satisfied customers
V6 hardbody, automatic: I have a 86.5 Nissan hardbody pickup,
I have a 86.5 Nissan hardbody pickup, V6 automatic that wont start! i have changed the spark plugs, wires, coil, dist cap and rotor button, also transmission filter and fluid. I can start engine after… read more
Expert-Repair
Expert-Repair
Owner Kingsland Auto & Marine Services
Vocational, Technical or Trade Scho
11 satisfied customers
Nissan/Datsun Xterra: my 2001 xterra suddenly stopped running
my 2001 xterra suddenly stopped running while driving. Checked the fuel pump, runs and shuts off after coming up to pressure. Ran obd, came up po340-camshaft position sensor, and po325-knock sensor or… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
pathfinder: Hi there I have a 1999 Nissan pathfinder with no
Hi there I have a 1999 Nissan pathfinder with no spark to plugs and also no fire. Before it quit running it had a knock sensor code( po325) Can you give me any answers ?… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
1999 Nissan Frontier: misfire in cylinder #6..plug wire..rotor
I have a 1999 Nissan Frontier. computer error message says misfire in cylinder #6. Changed the plug wire, then replaced the rotor and Dist cap. still have an intermitent rough idle/run.??… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
99 nissan: spark from cranking over eng with only 3 plug wires..dist
99 nissan 3.3 eng lost spark from cranking over eng with only 3 plug wires hookup to plugs the other 3 were just setting on eng . could this cause dist. to go bad? THIS ENG IS IN A MERCURY VAN. Thanks… read more
indy-tech
indy-tech
Shop owner, technician
Vocational, Technical or Trade Scho
11 satisfied customers
1998 Altima: cranks..wont start..timing light on plug wire
1998 Altima cranks but won't start. had it running for an hour went to drive and it died and will not fire. put timing light on plug wire when cranking, no flash. has 12v to coil connection on dist. T… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
1990 nissan 240sx: starts fine..cooled down..15-20 mins..wont start
I have a 1990 nissan 240sx, it starts fine when the engine is cooled down, but if you wait about 15-20 mins after you have been driving it it won't start.… read more
Ironmike
Ironmike
ASE Master L1 performance ,Ford tech
Vocational, Technical or Trade Scho
1,773 satisfied customers
96 nissan sentra: fuses..rotor..I put the ECM in diag mode..cranking
I have a 96 nissan sentra ,no spark,I ckd fuses pulled the dist cap made sure rotor was turning . I put the ECM in diag mode and it said (2long 1short)ignition signal in primary circuit is not entered… read more
Clifton B.
Clifton B.
ASE Master Auto Tech
Associate Degree
5,052 satisfied customers
95 nissan altima: with starting issues..crank..spark plug
I have a 95 nissan altima with starting issues. crank but will not turn over. I have fuel at the line, have spark from the spark plug boot. replaced the dist. cap and rotor. please help… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
1988 nissan: stalled..coil to dist cap..dist cap wires and rotor.
1988 nissan truck stalled. Mechanic found spark from coil to dist cap but no spark to plugs. new dist cap wires and rotor.… read more
Roy
Roy
Vocational, Technical or Trade Scho
5,421 satisfied customers
Frontier: Nissan..2wd..cranks..visable spark at dist
''00 Nissan 4dr Frontier, 2wd will not start. cranks but won''t start. Not getting visable spark at dist. Ques. 1: should I see a spark? ques. 2 if so any ideas what may be the problem? It just had tu… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
1999 Nissan: cab..spark plugs..distributor cap and rotor..compression
I have a 1999 Nissan P-up ex-cab with a 2.4 engine recently I would get a PO400 code, now that its gone I get a PO302 code so I changed the spark plugs,wires,distributor cap and rotor gapped the plugs… read more
Roy
Roy
Vocational, Technical or Trade Scho
5,421 satisfied customers
Nissan: spark plugs..The headgasket was blown, and the previous owner
I have just come into possession of an "87 nissan hardbody truck, napz 2.4 with 8 spark plugs. The headgasket was blown, and the previous owner had already started tearing it down. All that was left f… read more
mackin1
mackin1
Vocational, Technical or Trade Scho
216 satisfied customers
P100: T START USED AUTO SCAN OBD II 5 CODES PO303, P0440, P1447, P1444
CAR WON''T START USED AUTO SCAN OBD II 5 CODES PO303, P0440, P1447, P1444, P0100. HAVE REPLACED PLUGS, DIST & ROTOR AND FUEL FILTER STILL NO START, TURNS OVER HAS SPARK GETTING FUEL STILL NO START NIS… read more
Roy
Roy
Vocational, Technical or Trade Scho
5,421 satisfied customers
1997 Mercury Villager: runs fine..fuel pressure is fine..cap and rotor
I have a 1997 Mercury Villager (Nissan Quest) 3.0L, it shuts off after running for about 30 minutes (full hot). If it sits till cool it runs fine, seems to get erratic spark when hot and shortly there… read more
Clifton B.
Clifton B.
ASE Master Auto Tech
Associate Degree
5,052 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

747 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

602 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

161 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,482 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

589 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x