Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Nissan Questions
I've replaced the distributor, plugs, and fuel filter, but
I've replaced the distributor, plugs, and fuel filter, but i'm getting random misfire, and knock sensor codes with the bogging down occuring … read more
Jake
Jake
311 satisfied customers
P0505, p1705, p0171, p0325, p0300. 2000 xterra 4WD 3.3L.
replaced both valve cover gaskets, plenum gasket, cleaned throttle body, cleaned MAF sensor, replaced crankshaft position sensor, replaced TPS sensor, plugs, wires, … read more
Jake
Jake
311 satisfied customers
I had burned ECM on my Nissan Xterra. After I replaced the
I had burned ECM on my Nissan Xterra. After I replaced the ECM, My scan tool gave me the code P0505 … read more
Jake
Jake
311 satisfied customers
2004 Xterra has rough idle and sometimes stalls. Only
2004 Xterra has rough idle and sometimes stalls. Only happens in gear and when ac is on at a stop. Doesnt happen while driving. I've replaced MAF, Plugs Wires, Cap, Fuel Regulator, Fuel Filter … read more
Clifton B.
Clifton B.
ASE Master Auto Tech
Associate Degree
5,065 satisfied customers
2001 Nissan Xterra: that stalls when idling..fuel filter..000 miles
I have a 2001 Nissan Xterra that stalls when idling at a stop light. It only does this after about 20 minutes of driving. I have had a tune up, new air filter, fuel injectors cleaned, and the fuel fil… read more
Chris(aka-Moose)
Chris(aka-Moose)
Nissan Technician
Vocational, Technical or Trade School
747 satisfied customers
I have a 2000 nissan xterra that runs rough when it warms up.
I have a 2000 nissan xterra that runs rough when it warms up. It first happened last week when I was driving to work. It all of a sudden started to run rough and I could to rev the motor above 2000 RP… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
The fuel pump and there are no codes.when..stall..run properly
I have replaced the fuel pump and there are no codes.when you first up the engine while the engine is cold it will stall.Only after constantly appling the gas will the engine warm up and run properly.… read more
indy-tech
indy-tech
Shop owner, technician
Vocational, Technical or Trade Scho
11 satisfied customers
95 Nissan: SE..cab..200,000 miles..rpms climb then fall to the point
I have a 95 Nissan Hardbody SE Ext Cab 4WD. It has 200,000 miles now and is having trouble keeping an idle. The RPMs climb then fall to the point of stall then climb up to over 1000 RPM then fall to a… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
My wifes 2004 Nissan Murano is starting to stall at stop lights.
My wife's 2004 Nissan Murano is starting to stall at stop lights. The engine stays on but the vehicle will only move slightly untill the RPM's are are much higher than normal. This only occures when t… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
1998 nissan altima: stalls..distributor..wires ,fuel filter..egr valve
my 1998 nissan altima will jerk going down the road and stalls at red lights ,now it may only do this every 30 miles sometimes 2 miles ive had a new distributor,plugs,wires ,fuel filter. ive unplugged… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
2001 nissan maxima: its idle speed..fuel injection cleaner
my 2001 nissan maxima can not maintain its idle speed after ignition and turns off........tried fuel injection cleaner, tried to warm it for a while by pressing on the accelerator, but it shuts down w… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
2000 nissan xterra: 230k..The knock sensor code has been..idling rough
I have a 2000 nissan xterra with 230k miles on it. The knock sensor code has been on for over a year now. It has been idling rough for a year. Today, it started sputtering heavily on the highway and l… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
2004 Nissan Xterra: a P0505 code-Idle air control valve.117
2004 Nissan Xterra 3.3 with a P0505 code-Idle air control valve.117,000 miles.Vehicle starts fine cold,will start and stall when hot unless you put your foot on the gas pedal,after this it will idle a… read more
Roy
Roy
Vocational, Technical or Trade Scho
5,421 satisfied customers
1997 altima: stalls..red lights..night, only during warm day
1997 altima stalls on warm day intermediately at red lights. Car as been sitting for 3 years. Doesnt do it at night, only during warm day… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
2000 Nissan Xterra: I swapped out air filter..cap..rotor..fuel filter
I have a 2000 Nissan Xterra 6 cylinder that started to idle crazy when it got warm (5 to 15 min use) but cold start was fine. I swapped out air filter, plugs, wires, cap, rotor, pvc but nothing change… read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
2000 Nissan Xterra: stalls when engine is warmed up..rev..sputters
2000 Nissan Xterra idles rough and stalls when engine is warmed up. Engine won''t rev higher than 2000 RPM and sputters heavily. Has fairly new plugs and wires. Cleaner air filter. Runs perfect after … read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
2000 Nissan Maxima: air box, throttle body plate..rpms..warmed..stalls
2000 Nissan Maxima - recently replced MAF sensor, air filter, cleaned air box, throttle body plate, and re-calibrated at a Nissan dealership to solve the problem of "hitting a wall" at 3500 rpms, roug… read more
Infiniti Nissan Specialist
Infiniti Nissan Specialist
Master Technician
Vocational, Technical or Trade Scho
915 satisfied customers
2001 nissan maxima: v6..p0420 catalyst code and dies at stops
2001 nissan maxima v6 with p0420 catalyst code and dies at stops after warm up. Datastream and prelim tests do not support catalyst problem. Are there any common problems that would cause dying that I… read more
Infiniti Nissan Specialist
Infiniti Nissan Specialist
Master Technician
Vocational, Technical or Trade Scho
915 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

747 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

602 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

161 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,482 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

589 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x