How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Nissan
Satisfied Customers: 35501
Experience:  34 years of automotive Repair
7276279
Type Your Nissan Question Here...
Ron is online now
A new question is answered every 9 seconds

P0750 2002 dodge stratus wont shift gears

This answer was rated:

p0750 2002 dodge stratus wont shift gears

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

The code P0750 is a solenoid fault code and solenoid codes are usually caused by a problem with the relay, wiring, the solenoid pack or the Transmission Control Module . The TCM is built into the PCM if the PCM has four connectors. The most common cause is in most cases a failing Transmission Solenoid Pack and or the wiring to it. Before you replace any thing run the steps in the link below.

https://dl.dropboxusercontent.com/u/104923897/P0750%20Jul%2014.pdf

Customer: replied 9 days ago.
is the connector labeled c4 if not is it color coded

Hold on and let me get you a connector view.

Customer: replied 4 days ago.
RON my drop boxes not working any more Im ready to do these test

Okay let me dig them back up for you. Be sure to print them out as they do time out over time.

https://dl.dropboxusercontent.com/u/104923897/P0750%20Jul%2019.pdf

https://dl.dropboxusercontent.com/u/104923897/Shift%20pack%20Jul%2019.pdf

Customer: replied 4 days ago.
no connector c4 view

Which module are you looking for the C4 on?

Customer: replied 4 days ago.
Ok under the hood you have 2 one with 2plugs and one with one plug on the driver side

The C 4 plug is for the BCM, are you looking for the TCM connector ?

Customer: replied 4 days ago.
Oh I'm messing up. I need to know which is the Tcm. Lol I'm sorry

Okay the TCM is right beside the PCM in the engine compartment . See the link below.

https://dl.dropboxusercontent.com/u/104923897/TCM%20Jul%2019.pdf

See the connector view in this link as well.
https://dl.dropboxusercontent.com/u/104923897/TCM%20connector%20Jul%2019.pdf

Customer: replied 4 days ago.
i went through the steps and it leads to the solenoid pack by this because i have no resistance between pin 16 and 20 it reads OL and reads OL on pin20 to ground

Okay I would agree with that and its common for them to fail as well.

Ron and 2 other Nissan Specialists are ready to help you
Customer: replied 4 days ago.
hey they key stuck in the ignition is this common
Customer: replied 4 days ago.
problem solved new solenoid pack Thanks again RON