How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 621
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Pulling out of driveway and titan pro 4 will not accelerate

Customer Question

Pulling out of driveway and titan pro 4 will not accelerate when fuel pedal is engaged
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: Everything is normal
JA: What year is your Titan?
Customer: 2008 with 142000 miles
JA: Are you fixing your Titan yourself? What have you tried so far?
Customer: Can't find anything wrong
JA: Anything else you want the mechanic to know before I connect you?
Customer: no sir just need this fixed
Submitted: 9 months ago.
Category: Nissan
Expert:  Jay replied 9 months ago.

Hello my name is ***** ***** thank you for your question.

Do you have a Service Engine Soon light on when the truck is running? Also what do you mean it will not accelerate? What is it doing exactly?

Do you have a K&N air filter or cold air intake installed on your truck?

Let me know these things please so I can try to help determine what course of action is needed for your issue.

Customer: replied 9 months ago.
Check engine light is on but air way clean and have put new filter on 1 wk ago. The motor will produce Rpms until I place it in gear( drive or reverse) then it has no rpms and I can out walk the truck when it is placed in either gear
Expert:  Jay replied 9 months ago.

If the Service Engine Soon light is on, do you happen to know what codes you may have?

Customer: replied 9 months ago.
No light has been on for a long time now
Expert:  Jay replied 9 months ago.

Well the first thing we need to see is what codes you have. I have a few thoughts, but I would need the codes to verify.

how drive-able is the truck? Do you have a Auto Zone near you? They offer free scans. I am trying to determine if you can swing by there and have it scanned and return back with the codes?

Customer: replied 9 months ago.
10-4 it will be in the morning
Expert:  Jay replied 9 months ago.

Ok... Once you get it let me know. I work during the day and am normally online in the evening. So we will continue then..ok?