Nissan Repair Questions? Ask a Mechanic for Answers ASAP
Hello my name is***** am an ASE Master Technician and I am glad to help you with your question.
I have seen problems in the wiring harness cause this problem before. I have also seen a faulty ecm cause this problem.
Check the harness by doing a continuity test between the pedal sensor and the ecm. If the harness is ok replace the ecm.
Please reply to this if you need more help and we can continue this conversation at no extra charge. This does not have to be my only answer. If you are satisfied with my service, please rate at the top of the screen. Rating does not close out your question. Remember, sometimes it is difficult to completely diagnose your vehicle without being there, but I will try to give you the best answer I can. Hoping to be giving you 5 star service.
I can send you the test procedures and wiring diagrams from the factory service manual if you would like.
Ok if you accept the offer I can email the service manual to you.
Hello again Dan here,
I am contacting you because the post has not been closed or rated.
This question is coming up on 7 days which means it will time out and close.
You have already paid to get this question answered, but you have not rated.
Let me help some more. Is there anything else I can help you with?
If I did not give you 5 star service, please let me know what I missed.
The manual will show diagrams of which pins to check and how to diagnose these codes.
Ok I will send it, make sure to rate positively at the top of the screen, and it would be appreciated. Thanks.