How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask EricFromCT Your Own Question
EricFromCT
EricFromCT, ASE Certified Technician
Category: Nissan
Satisfied Customers: 3803
Experience:  ASE Master certified L1, L2, Diesel Certified 16 years experience
34559540
Type Your Nissan Question Here...
EricFromCT is online now
A new question is answered every 9 seconds

Have to shave heads, what all needs to come off 05 titan to

Customer Question

Have to shave heads, what all needs to come off 05 titan to pull the heads, have then machined and replace head gasket
JA: Is this your first time dealing with this issue? What size is your engine?
Customer: 5.6L, 4x4, tow package
JA: What is the model/year of your Nissan?
Customer: 05 le
JA: What year is your Nissan?
Customer: 05 titan le
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: So far I have intake manifold off, radiator out and chain covers off. Thermostat housing off too.
JA: Anything else you think the mechanic should know?
Customer: Have not pulled the engine, as it looks like I can get to the heads without pulling.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Nissan Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Nissan
Expert:  EricFromCT replied 1 year ago.

Hi. At this point you need to remove the timing chains, the camshaft sprockets and the camshafts. Make sure the exhaust is unbolted, then just remove the head bolts

Customer: replied 1 year ago.
Any special tools needed and what else has to come off for front engine cover to come off.
Expert:  EricFromCT replied 1 year ago.

You need a puller to remove the crankshaft pulley.

Expert:  EricFromCT replied 1 year ago.

To get the front cover off the upper oil pan needs to be removed, the timing control solenoids and the intake timing sensors. and the crank pulley needs to be removed.

Customer: replied 1 year ago.
Got it. So the front cover has to come off too?
Expert:  EricFromCT replied 1 year ago.

Yes. The chains need to be removed, then the cam sprockets then the camshafts so you can get to the head bolts.

Customer: replied 1 year ago.
Ok.
Expert:  EricFromCT replied 1 year ago.

Let me know how it works out for you and please remember to rate my assistance.

Customer: replied 1 year ago.
Roger that
Expert:  EricFromCT replied 1 year ago.

Did you get the heads off?

Customer: replied 1 year ago.
Not yet. Took a break, it's hot out there. Lol
Expert:  EricFromCT replied 1 year ago.

Sounds good. Rate my assistance using the 5 stars and let me know your progress. Thanks.