How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 615
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Took out valve body and replaced,won't go to Park now only

Customer Question

took out valve body and replaced,won't go to Park now only revers so it wont state..what did i do wrong ??
Submitted: 1 year ago.
Category: Nissan
Expert:  eric replied 1 year ago.


I need the year and model of your Nissan.

Also, is this a new, used, or remanufactured valve body?

Did it come assembled with the check balls in place or did you have to install the check balls?

Customer: replied 1 year ago.
2008 altima 3'6 took out valve body replaced all servos..replaced valve body will not go to park to start.only reverse trans. model # *****
ckeck balls in place
Expert:  eric replied 1 year ago.


I will need to opt out and see if another expert can help as dont have any schematics on yours to see where the problem may lay. If another expert can help, they will post here

Customer: replied 1 year ago.
ok i'm waiting patiently..thanks Eric
Expert:  Jay replied 1 year ago.

Hello my name is ***** ***** thank you for your question.

Eric has opt'd out cause he feels he can not help you with your issue. This could be a simple issue. The Valve body comes with the TCM built into it. It may simply need to be programmed to operate properly.

Where did you get the Valve body?