How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jake Your Own Question
Jake, Nissan Technician
Category: Nissan
Satisfied Customers: 3968
Experience:  Experienced collision repair technician, Pulaski Tech graduate and DSM hobbyist.
Type Your Nissan Question Here...
Jake is online now
A new question is answered every 9 seconds

I have a 2003 Nissan Altima, I have gone to a repair shop to

Customer Question

Hi I have a 2003 Nissan Altima
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have gone to a repair shop to fix my transmission twice. After the repair a second time with a different transmission I'm still pulling two codes I went to auto zone. The code P1564 ASCD steering switch circuit malfunction and P1760 A/T overrun clutch solenoid. I was advised by auto zone the cruise control switch can cause the codes. My does not drive smooth anymore I hear making a sound now. Do you think that can be the issue. On my dash when I turn the car on the car in park sign flash for about 30 seconds then goes away too
JA: Has the clutch been slipping? Are you having any trouble shifting?
Customer: I have not had any trouble shifting the car. What is the clutch?
JA: Anything else you think the mechanic should know?
Customer: No I don't think so.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Nissan
Expert:  Jake replied 1 year ago.

what repairs did the transmission shop do?

the ASCD switch will not cause the P1760

Customer: replied 1 year ago.
They replaced the transmission twice and changed all four sensors
Customer: replied 1 year ago.
What could be the issue?
Expert:  Jake replied 1 year ago.

do you get any hard shifts? One thing I have seen quite a few times on these transmissions is where they switch two of the sensor connectors, but it usually pulls a P1754 not O1764