How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 621
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

I have a 2000 Nissan Xterra and about 2 or 3 months ago the

Customer Question

I have a 2000 Nissan Xterra and about 2 or 3 months ago the key tip broke into the ignition I never got the key out it just wouldn't start about a week or 2 ago. so I ended up poping the clutch for the last week or two and now I can't get my engine started either trying to clear out what the problem
Submitted: 1 year ago.
Category: Nissan
Expert:  Jared D replied 1 year ago.

So at this point are you able to turn the ignition at all?

Would you like to attempt to replace the ignition tumbler?

Customer: replied 1 year ago.
I can turn the ignition key and I get power but he does not start
Customer: replied 1 year ago.
I'm thinking of being mission Tumblr and I'm considering replacing it
Expert:  Jared D replied 1 year ago.

I think the problem is either in the tumbler not allowing the ignition switch to turn to the run position or the switch is bad. The problem is that I can't find a diagram in any of my reference materials that will help walk you through replacing the switch/tumbler.

Customer: replied 1 year ago.
Come to find out I have a bad starter as well as the problem with the ignition cylinder
Expert:  Jared D replied 1 year ago.

Wow, ok. That's a bummer. The replacement procedure from Nissan consists of: remove two bolts and starter.