How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Nissan
Satisfied Customers: 15706
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Nissan Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

1990 pathfinder auto, takes off in second shifts to third. No overdriv

Customer Question

1990 pathfinder auto, takes off in second shifts to third. No overdrive or first gear
Submitted: 1 year ago.
Category: Nissan
Expert:  Tim Mohr replied 1 year ago.
Hi, my name is ***** ***** is called limp home mode, the transmission will go into limp mode if it detects a fault code in the transmission module, have you had codes read yet?
Customer: replied 1 year ago.
Yes no codes present
Customer: replied 1 year ago.
This happened 2 weeks ago and it came out of it now the problem has rerurned
Customer: replied 1 year ago.
Help lol
Expert:  Tim Mohr replied 1 year ago.
how did you read he codes?
Customer: replied 1 year ago.
Computer under seat has diagnostic mode
Customer: replied 1 year ago.
Code code 55 which was all clear
Expert:  Tim Mohr replied 1 year ago.
this only reads engine codes, not transmission codes, if its in limp mode, there will be a code set in the transmission module, and this would determine the problem, you need a scanner to retrieve the trans codes, Tim
Customer: replied 1 year ago.
Where do i plug in to read tranny codes
Customer: replied 1 year ago.
Is it the obd port
Expert:  Tim Mohr replied 1 year ago.
Yes
Customer: replied 1 year ago.
Does a regular scanner read tranny codes
Expert:  Tim Mohr replied 1 year ago.
if its set up for obd1, most cheaper ones will not, my snap on MT2500 does the trans codes on these,Tim
Customer: replied 1 year ago.
Ok im gonna hit a shop and borrow one
Customer: replied 1 year ago.
This first gear thing sucks its an off road teuck
Expert:  Tim Mohr replied 1 year ago.
Yes, first is definately needed, have the codes read, Tim
Customer: replied 1 year ago.
No obd 1 can read tranny codes
Expert:  Tim Mohr replied 1 year ago.
My MT 2500 will read the data on these
Customer: replied 1 year ago.
Just went to a shop with one wont read em
Customer: replied 1 year ago.
State of rhe art snap on
Customer: replied 1 year ago.
Any advise
Customer: replied 1 year ago.
Hello
Customer: replied 1 year ago.
How do i umsubscribe thjs is useless