How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Nissan
Satisfied Customers: 27917
Experience:  Over 17 years diagnosing and repairing vehicles.
Type Your Nissan Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

Altima: 2001 2.4 Altima no spark, has new distributor and the

Customer Question

2001 2.4 Altima no spark, has new distributor and the trigger wire is showing to have 12 volts ground
Submitted: 1 year ago.
Category: Nissan
Expert:  peterpete190 replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here. If you have not had the fault codes checked at all to see what codes are set these codes need checked using a compatible scan tool that can plug in and communicate with all computers.Once this has been done any codes set need diagnosed to locate and repair this issue here.Check and make sure the rotor is turning in the distributor when the engine is turned over.If it is not this can indicate a fault with the gear that the distributor rotates with.If this is o.k. and no codes set let me know. If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.Thanks Pete