How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 621
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Titan 2010 turns over but wont start
, told you all I

Customer Question

titan 2010 turns over but wont start
JA: Sometimes things that you think will be really complicated end up being easy to fix with a Nissan. The Nissan Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: told you all I know. battery is good, all electrical works, starter works, but no ignition
JA: Lots of things can cause problems with the battery. The Nissan Mechanic will know what to do. Are you hoping to fix this yourself?
Customer: battery is no the issue
JA: Is there anything else important you think the Nissan Mechanic should know about your Nissan?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Nissan Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Nissan
Expert:  Jay replied 1 year ago.

Hello my name is ***** ***** thank you for your question

Does the engine turn over but not start?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
was running / starting fine yesturday
Expert:  Jay replied 1 year ago.

Is it cold where you are located?

Customer: replied 1 year ago.
it is
Expert:  Jay replied 1 year ago.

Try this... get a hair dryer out and open the hood and on the passenger side of the engine bay on the inside of the fender is where the ECM is located. Take the hair dryer and warm the Ecm and then see if the truck starts

Customer: replied 1 year ago.
how long should the dryer be on?
Expert:  Jay replied 1 year ago.

Till the ecm is warm