How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Nissan
Satisfied Customers: 28705
Experience:  Over 17 years diagnosing and repairing vehicles.
Type Your Nissan Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

I am looking on removing a driver side front differential

Customer Question

I am looking for help on removing a driver side front differential carrier bearing for a 2005 Nissan armada LE (4x4). This is the outside bearing behind the seal and adjustment nut. NOT inside the carrier
Submitted: 1 year ago.
Category: Nissan
Expert:  peterpete190 replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

Here is some info on how the side carrier bearings are removed.


7. Assemble Tool as shown and remove seal. Tool number : - (SP8P)

8. Turn nose of gear carrier down. Remove drive pinion front bearing outer race using Tool. Locate driver on back edge of outer race, then drive outer race out. CAUTION: Do not nick gear carrier. Tool number A: - (C-4171) B: - (D-103)

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete