Nissan Repair Questions? Ask a Mechanic for Answers ASAP
did you damage it when you attempted to remove it?
you said the speed sensor was stuck.. did you damage the speed sensor? did you scan for abs codes?
that's on press in bearings...
soak the sensor with penetrating oil and replace it
did you damage the sensor when you rid to remove?
did you damage the sensor when you tried to remove?
do you have a dvom?
volt meter / ohm meter
A good wheel speed sensor will generally produce an alternating current (AC) voltage reading of 50 to 700 MV when the wheel is spun by hand at about one revolution per second.
a good wheel speed sensor and circuit will typically have a resistance of 800 to 1400 ohms
50 to 70 mv when moving ,, resistance is measured not moving..
Please remember to only rate my service when you are satisfied. IF you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.
I am not paid unless I get a rating of 3 to 5 Stars/Smiley Faces. If I have helped you with your question, please give me an appropriate rating so that I get credit for helping you