How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 615
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Murano: jay .. My Nissan murano start perfect in the morning

Customer Question

Hi jay .. My Nissan murano start perfect in the morning but after few hours running I shut it off and don't want to turn back on till cools down .... What you think it is ..?? Thank you in advance
Submitted: 2 years ago.
Category: Nissan
Expert:  Billy replied 2 years ago.
Hello and Welcome! I'm Billy and i will assist you with your inquiry. Feel free to ask if any further info is needed.
When it's hot and you're having the problem, does the engine turn (starter engage)? or you get nothing at all when trying to start?
Customer: replied 2 years ago.
I get a crank whe it's hot but not start when is cold start whit no problem
Customer: replied 2 years ago.
it happen to me for the first time I went to the store (started whit no problem ) when I got out of the store It didn't want to turn on and after 1hr and a half wait I try again and turn right back on like nothing happen
Expert:  Billy replied 2 years ago.
It happened only one time?
Could you check for spark, injector pulse?
Can you call Nissan dealer, give your VIN, and check if your vehicle is affected by the cam, crank sensors' recall?
As they would cause this.
Customer: replied 2 years ago.
Everyday I have the same problem ... Ok I will call when they open
Expert:  Billy replied 2 years ago.
It could be these, or other... Let's check these sensors first, and proceed accordingly.
I will be waiting for your findings...