How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 615
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Clicking noise, when placing load on drivetrain, forward to

Customer Question

Clicking noise, when placing load on drivetrain, forward to reverse, vice versa, coast to throttle, etc. Sounds like LF wheel, good mechanic said CV joint seems okay. NO extra or clunking when turning. AWD 2009 Rogue, 125000 Kim's
Submitted: 2 years ago.
Category: Nissan
Expert:  Billy replied 2 years ago.
Hello and Welcome! I'm Billy and i will assist you with your inquiry. Feel free to ask if any further info is needed.
Were the engine and transmission and exhaust mounts checked?
Customer: replied 2 years ago.
Given the context of the visit to the garage, an oil change and brake service, I suspect they didn't look any further than CV joints at this time.
Expert:  Billy replied 2 years ago.
Hello again,
Would you be able to check those, so we proceed with the diagnostics if the problem persists?
Given the symptoms, these would be the most likely items, i would check them first. There still would be other possibilities, but we work our way from the most common causes.