Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Nissan Questions
I changed idle control sensor. Throttle body sensor, and
I changed idle control sensor. Throttle body sensor, and knock sensor. Now my 2000 Nissan quest is idling high and dipping. … read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
I removed the throttle position sensor on my 2001 nissan
Hi Mike. I removed the throttle position sensor on my 2001 nissan xterra- shouldn't have. I was cleaning the mass air flow sensor and thought this was another sensor I could clean and have quickly lea… read more
Mike V.
Mike V.
Nissan Technician
27,997 satisfied customers
My 2000 pathfinder 3.3 starts fine idles fine no misses but
my 2000 pathfinder 3.3 starts fine idles fine no misses but soon as i put it in reverse or drive it shuts off … read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
Got a p1447 code in my 96 maxima. after replacing the tps,
got a p1447 code in my 96 maxima. after replacing the tps, the engine idles around 1100, but when you give it any gas, it revs up and down in a consistent pattern, and barely drives. I don't have a wh… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
87 nissan d21 v6, changed tps since ecc gave a 43 code,
87 nissan d21 v6, changed tps since ecc gave a 43 code, however now it won't turn over. The new connector was messed up so took new sensor and soddered old good connection to it. Now it won't turn ove… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
xterra: hi,changing timing belt on 2002 xterra (3.3l v 6).
hi, changing timing belt on 2002 xterra (3.3l v 6). changed belt and cranked car - ran rough and engine bogged on acceleration. i checked all vacuum hoses and electrical connections and all attached c… read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
pathfinder: hello, I have a 2002 pathfinder. Had a new iac
hello, I have a 2002 pathfinder. Had a new iac valve installed and a throttle position sensor. on initial start up it will not idle cold or hot. Must give it gas to keep running for a minute or so. Th… read more
Jake
Jake
311 satisfied customers
nissan sentra: Have a 1988 nissan sentra. Having issues with
Have a 1988 nissan sentra. Having issues with TPS sensor. Need base setting(how many truns on throtttle plate) for throttle plate position. Voltage settings, mechanical settings. car idles very high( … read more
kwiggins29059
kwiggins29059
Associate Degree
219 satisfied customers
99 sentra: idle..garage... i have another sentra 2.0 so i..tps sensor
i have a 99 sentra auto with a 2,0. just bought the car and has a veryrough idle.i took it to a garage and the code said tps. i have another sentra 2.0 so i switched the tps sensor. didnt run a whole … read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
Nissan pathfinder: timing belt....I cannot find the timing marks..sohc
Need directions on installing timing belt....I cannot find the timing marks. 1998 Nissan pathfinder 3.3 SOHC… read more
Mike V.
Mike V.
Nissan Technician
27,997 satisfied customers
20002 G20: right front..intermittent vibration..tires
My 20002 G20 has right front "pop" or click when turning right or backing up and turning and vibration at intermittent vibration at 40mph and above. New tires have not addressed the probem. What might… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
Nissan quest: timing belt..cranked..timing chain..compression test
Mechanic changed timing belt on my nissan quest 2004. Now does not you can cranked it but engine does not run. One mechanic told me that timing chain installed wrong. Now another one tells me that on … read more
Mike V.
Mike V.
Nissan Technician
27,997 satisfied customers
nissan maxima: 3.0, already change the tps valve..idle air..leaks
I have this code PO505 and P1445, on my1996 nissan maxima 3.0, already change the TPS valve,cleam the idle air contrl valve, check for leaks, what i have to do next… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
90 D21: Drove..speed manual..I went to restart its bogging out
Drove my '90 D21 2.4 (2389cc) 5-speed manual, truck about an hour, turned it off for 5 minutes. When I went to restart it's bogging out. It'll start and, nursing it I can, get to ~2000rpm, beyond that… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
I took the TPS off of my 2001 Nissan Frontier yesterday, I
I took the TPS off of my 2001 Nissan Frontier yesterday, I marked its position before i removed it and it appears to be back in the same location. the code P0120 is showing and my truck sometimes idle… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
p0120 code and it shifts at 4500 rpm wont shift at all after
p0120 code and it shifts at 4500 rpm wont shift at all after about 40 miles per hour replaced the tps same prob put the old one back on same problem.thanks for your time… read more
FixUrNissan
FixUrNissan
Shop Forman / Lead Tech / Parent
Vocational, Technical or Trade Scho
1 satisfied customers
1998 nissan pathfinder: timing belt..oil pump..crankshaft sprocket
I'm replacing the timing belt on my 1998 nissan pathfinder. I can't find the notch on the oil pump housing that the service manual references to line up the punchmark on the crankshaft sprocket. I hav… read more
Mike V.
Mike V.
Nissan Technician
27,997 satisfied customers
96 PATHFINDER 4X4: THE THROTTLE POSITION SENSOR CHANGED..CAR WONT
I HAD THE THROTTLE POSITION SENSOR CHANGED AND NOW THE CAR WONT SHIFT INTO THIRD GEAR IT IS A 96 PATHFINDER 4X4 ,WHAT COULD BE THE PROBLEM AND THE SOLUTION.… read more
Paul Mac
Paul Mac
Vocational, Technical or Trade Scho
58 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

747 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

602 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

161 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

27,997 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

589 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x