How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 615
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Hey fellow mechanic here have a 07 nissan frontier manual trans

Customer Question

hey fellow mechanic here have a 07 nissan frontier manual trans changed motor now wont start used engine was auto trans just installed pilot bearing and swapped clutch and flywheel, changed all crank and cam sensors and checked signal at computer all wave form are there and look normal, a;so changed main relay box under hood with new one, PCM is only running one code P1564 steering switch I am leaning towards anti theft This truck belongs to my Childhood best friend who just lost his wife I need to fix this thing BAD Thanks Dave
Submitted: 2 years ago.
Category: Nissan
Expert:  Mike V. replied 2 years ago.
Hi Dave,Is the security light staying on solid when you crank the engine or flashing?
Customer: replied 2 years ago.
Not on on at all never see the light not even for a bulb check ??
Expert:  Mike V. replied 2 years ago.
Security light should come on with the key out. If it's not coming on when you are cranking the engine then it's not a security issue. This might not work, but try unplugging the crank sensor and see if the truck will start and let me know.

Related Nissan Questions