How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose)
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 615
Experience:  16 years of experience
2499435
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

QUEST: I HAVE NISSAN QUEST WONT START 2007 I DONT HAVE SPA

Customer Question

I HAVE NISSAN QUEST WONT START 2007 I DONT HAVE SPARK
Submitted: 2 years ago.
Category: Nissan
Expert:  Jay replied 2 years ago.
Hi, My name is***** happy to help you. During our conversation, I may be presenting you with different things to try, and ask you some Questions to get a better understand of the issue so I can answer your question properly. So stick with me to the end, and I am sure we should be able to get this issue resolved for you!
Did you have any codes? Did you change the Cam Sensors cause there was a code for them? Also where did you buy the Cam Sensors?
Customer: replied 2 years ago.
yes ihave camsensors p0340 p0345
Customer: replied 2 years ago.
i buy from autozone nating hapen
i change check new ignition coil
Expert:  Jay replied 2 years ago.
The issue is most likely the after market Cam Sensors. They never work right.
You need to replace those sensors with ones from the dealer. To many times I have run into after market cam sensors still causing no start issues, or stalling and hard start but not throwing codes.
You have a ignition coil per cylinder, so it's not going to be a coil.
You need to start with replacing the Cam Sensors with ones from the dealer.
Do you have any more questions on this?
Customer: replied 2 years ago.
i have recall for the computer has rost because idont want spend on sensors if not work i have u1000
Customer: replied 2 years ago.
iwantmake sure is the sensor or the computer how i check that
Expert:  Jay replied 2 years ago.
You have a U1000? In what systems?
That is a communication issue between major control units.
What recall do you have for the computer. I don't recall any recalls on the computer?
You need to replace the sensors regardless. They never work right or can set false codes.
Let me know.