How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Nissan
Satisfied Customers: 27812
Experience:  Over 17 years diagnosing and repairing vehicles.
Type Your Nissan Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

Nissan/Datsun Micra 1.2: I have anissan micra 1.2 with

Customer Question

hi I have a
nissan micra 1.2
with crankshaft sensor the car stops
without it doesn't stop but doesn't run well
Submitted: 2 years ago.
Category: Nissan
Customer: replied 2 years ago.
I found out that someone made one engine from 2 micra engines
checked timing belt changed crankshaft sensor, camshaft sensor, camshaft position actuator
keeps throwing p0340,
when the crankshaft sensor is plugged in the car doesn't start
Expert:  peterpete190 replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
Inspect the crank and cam sensor wiring and wiring connections to see if any wiring or connections are found to be shorted or damaged in any way.If a fault is found it will need repaired to correct this here.
If this is all checked and all found to be o.k. this can be due to an internal electrical fault in the engine computer itself needing replaced,I have seen the computer short out/fail internally causing this issue here.
Thanks Pete
Customer: replied 2 years ago.
when the crankshaft sensor is unplugged the car starts