Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
2015 Nissan Versa, 3rd CEL in a row, p 0171 confirmed, p0300
2015 Nissan Versa, 3rd CEL in a row, p 0171 confirmed, p0300 pending. Bank 1 too lean, multiple misfires. 1st CEL MAF sensor problem, cleaned and reinstalled light off for a bit. 2nd misfire #2, new c… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
P0300 is the only code im getting.. idles rough, wont rev
p0300 is the only code im getting.. idles rough, wont rev over about 2500rpms. Strong gas smell after running for a while. Ill just list what i have done so far. replaced spark plugs and all 6 coils. … read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
7,324 satisfied customers
I have three codes po171,po300,po447 runs rough. 2009
I have three codes po171,po300,po447 runs rough JA: Just to clarify, what's the exact code? And have you tried to reset it? Customer: Yes JA: What is the model/year of your Nissan? Customer: 2009 miss… read more
carlosbosch
carlosbosch
130 satisfied customers
05 Nissan Altima shuts off while driving for 1hr or more The
05 Nissan Altima shuts off while driving for 1hr or more The car turned off one time after getting off of work, going to the store I was putting my car in park, my car was doing a jerking movement, so… read more
William Cole
William Cole
service oof heavy equipment
180 satisfied customers
Got a Camshaft Position Sensor code. Changed. That. Then
Got a Camshaft Position Sensor code. Changed. That. Then immediately started getting P0303 misfire on cylinder 3. Changed Coil and plug. All good. Changed all coils and plugs, and Intake manifold gask… read more
Kurt Mulling
Kurt Mulling
Lead Technician/ now retired
High School or GED
1,609 satisfied customers
Nissan pathfinder2007 random misfire code P0300. Code P0300.
Yes I replaced six coil packs, six spark plugs,crankshaft position sensor and camshaft position sensor still same code P0300 … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
Vehicle troubled started with P0303 code. And two O2 sensor
Vehicle troubled started with P0303 code. And two O2 sensor codes. O2 codes cleared and have not returned.Found cylinder 3 coil to be bad, swapped with new coil. P0303 code has stayed off.Vehicle stil… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
I'm getting a multiple misfire code. P0300. Just started
I've replaced all the spark plugs the ignition coils and also the upstream and downstream O2 sensors … read more
vwtech0405
vwtech0405
VW Technician
Associate Degree
10,037 satisfied customers
Multiple issues. Started runing and multiple O2 sensor
Multiple issues. Started runing rich and multiple O2 sensor (random sides and front/back) codes. Then began random misfire codes. Replaced spark plugs, all O2 sensors (and recalibrated), all catalytic… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
26,773 satisfied customers
2005 Nissan frontier v6 4.0L starts and runs ok, but when I
2005 Nissan frontier v6 4.0L starts and runs ok, but when I go to accelerate it misfires. can get over 40 mph. SES light on. Codes are P0430-catalytic bank #2 p0300-multi misfire p0306. #6 cylinder mi… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
Salutation, having one car problem to another. I have a 1997
Salutation, having one car problem to another. I have a 1997 Nissan Pathfinder 3.3 with a P0300 multiple misfire code. It chugs and buckles under low load from 1000 to 2000rpm, thats when the engine l… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
26,773 satisfied customers
Armada: 2005 Nissan Armada ecl came on I checked with scanner
2005 Nissan Armada ecl came on I checked with scanner shows p0420-p0430- removed exhaust pipe up stream cat drivers side broke all in pieces. Can I run without cats?… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
Nissan Pathfinder: I own a 2001 pathfinder and it is bogging
I own a 2001 pathfinder and it is bogging out when i accelerate over 2500rpm. Replaced fuel pressure regulator... fuel pressure was okay. When i disconect the MAF sensor it runs even worse so im not s… read more
Jake
Jake
Nissan Technician
6,919 satisfied customers
2005 Nissan Pathfinder: catalytic converter..a random misfire code
I have a 2005 Nissan Pathfinder 4.0 V6... Had catalytic converter replaced .. Bank 1 ... Now is throwing a random misfire code P300...and a P1283 code.. what are these codes and can one cause the othe… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
Nissan xterra: accelerator..idle..a check engine too
Have a nissan xterra 2000 with a accelerator and idle issue. Had a check engine too. I got the codes done at nissan. they said it was for sure the MAF that was bad. Replaced it and it runs better but … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
P1148 , P0-300, P0-174 nissan maxima 2000. Hasitates in the
P1148 , P0-300, P0-174 nissan maxima 2000. Hasitates in the morning when stats and loose power sometimes.… read more
Infiniti Brian
Infiniti Brian
Infiniti Master Technician
Vocational, Technical or Trade Scho
97 satisfied customers
stall..constant speeds (3000rpm) the car will randomly loose power
YMPTOMS: Here is a more detailed description of the problem above: On start-up: Car turns over and revs land about 1000-1200 - upon pressing throttle to car tries to rev up but bogs down to a near sta… read more
James
James
Technician
High School or GED
182 satisfied customers
1997 Pathfinder: September the timing belt and distributor..accelerate
Hi, I have a 1997 Pathfinder that has been having all sorts of problems the last few months. In September the timing belt and distributor were replaced. In December I started having problems where the… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,081 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,065 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

10,081 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

706 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

93 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x