How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony, ASE Certified Technician
Category: Nissan
Satisfied Customers: 11751
Experience:  ASE Master Automobile Technician with over 18 years exp. in this field.
Type Your Nissan Question Here...
Anthony is online now
A new question is answered every 9 seconds

nissan terrano: hi in order ti install a pioneer gps do i need

This answer was rated:

hi in order ti install a pioneer gps do i need the tacho signal or the speed sensor signal ??
Hello! Welcome to justanswer!

That would need the speed sensor signal.
Anthony and 4 other Nissan Specialists are ready to help you
Customer: replied 3 years ago.

and that would be pin 32 on the eccs right ??

I'm not sure of the pin number. But you need a speed sensor signal.
Customer: replied 3 years ago.

to get it straight the speed sensor signal comes from a sensor on the driveshaft and the tacho signal i what we used to call rpm signal right ??

cous then i can take it direct from the sensor since it shouldn't be that hard to locate.


Thats correct.
Customer: replied 3 years ago.

ok then i'm fully satisfied THX

BTW im an Electronic technitian but auto Electrics is a sience of it's own


Thank you!