Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
6Bucs had another question, my scanner is reading also code
6Bucs had another question , my scanner is reading also code po325 p and po300 p ..only had po300 now my scanner shows po325 p ..what is the po 325 p code… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,252 satisfied customers
Rough idle, lifter tick. Consistent. 2003 frontier 3.3l.
Replaced Sparks and wires, which stopped it from misfiring. Then the lifter tick, idle and engine light came on. Just had the upper gaskets and knock sensor replaced. Car ran great for about 45 min then check engine came on and tick/rough idle came back. … read more
Jake
Jake
5,680 satisfied customers
Lots of smoke and liquid fuel coming from tail pipe after
Lots of smoke white and liquid fuel coming from tail pipe after replacing CMP sensor have had codes PO340,PO306,PO300. After clearing the codes my code reader still shows PO340,PO300 as "permanent " a… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
21,311 satisfied customers
I have an 2001 frontier it's and awesome truck up to this
Hi I have an 2001 frontier it's and awesome truck up to this point. Every time I driver over 50 miles an hour the car starts to jerk and it only stops when I let of the gras and let the rpms go down. … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
662 satisfied customers
I have a 2001 infinity G20 and the knock sensor is bad and
I have a 2001 infinity G20 and the knock sensor is bad and I'm trying to find where it is or if I have to take the motor apart … read more
rpmdiag
rpmdiag
High school
9,562 satisfied customers
Xterra: 2000 Nissan xterra ran hot head gaskets replaced
2000 Nissan xterra ran hot blown head gaskets replaced head gaskets now engine run but switches from open lope to closed lope then fuel system fault get a knock sensor code and muti cycliner miss fire… read more
mike switzer
mike switzer
750 satisfied customers
frontier supercharged: I have an 01 frontier with rough idle
I have an 01 frontier with rough idle and no power till about 2500 rpm . Has 250,000 miles . Have replaced cracked exhaust manifolds, all 02 sensors , new iacv , checked evap can no fuel smell , no wa… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
35,009 satisfied customers
Nissan Frontier: 2003 nissan frontier with code po300 ,after
2003 nissan frontier with code po300 with engine service light come on,after replace new spark plug, now after another code scan show code po328 knock sensor, the misfire is less than before but still… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
25,573 satisfied customers
Frontier: Hey Mike we have a 2000 Nissan frontier, it has been
Hey Mike we have a 2000 Nissan frontier, it has been hell! We did a head job, it ran perfect for a week, came back rough idle. We checked timing, it is perfect. We took upper and lower intake off, rep… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,929 satisfied customers
Nissan/Datsun Quest: I have an 02 nissan quest that gave me
I have an 02 nissan quest that gave me codes po300 and po325, changed knock sensor runs great cold but once it warms up start missing and sputtering, reread codes po300 and po300pd come up now. change… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,929 satisfied customers
Nissan/Datsun Frontier SE: I just had the knock sensor, timing
I just had the knock sensor, timing belt,waterpump,intake gasket all replaced on my 2001 frontier 3.3 v6. it is idling very rough . how do I fix this?… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
25,573 satisfied customers
Knock sensor..wiring..the computer to fail and needs to be replaced
Replaced the knock sensor. Replaced wiring. Now mechanic is saying a short caused the computer to fail and needs to be replaced. really?… read more
I. Silva
I. Silva
High School or GED
1,421 satisfied customers
Quest: thermostate..idle..2,200RPM timing was at 5deg, fuel press
I have a 97 3.0 Qwest that has PO325&PO300 codes I have replaced the thermostate it was not reaching proper temp. the idle was at 2,200RPM timing was at 5deg, fuel press. 45.3lbs. pinch of Fuel/Press.… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
25,573 satisfied customers
2003 Nissan Frontier: changing the chip..mpg..want perturb my engine
Does changing the chip in a 2003 Nissan Frontier alter the function of the engine? Is it detrimental? I want to increase my mpg, but I don't want perturb my engine.… read more
Nathan
Nathan
Nissan Master Technician
Bachelor's Degree
734 satisfied customers
Frontier: has a po325 code knock snsor..manifold leak pass...code came
Iam working on a 01 Frontier, has a PO325 code knock snsor. it has a manifold leak pass. side, Will that make that code came on?? The truck will drive good til you stop shut it off then go to start it… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,878 satisfied customers
2000 Frontier: V6..stick 4wd 100k miles..distributor
My son just bought his 1st truck, a 2000 Frontier 3.3 V6 stick 4wd 100k miles. Previous owner had a new distributor installed and got it running. (I think it had been sitting for a year or longer. Wit… read more
Nathan
Nathan
Nissan Master Technician
Bachelor's Degree
734 satisfied customers
2000 mercury villager: a knock sensor code..runs rough..stalls..warms
my 2000 mercury villager has a knock sensor code and runs rough and stalls when it warms up… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
25,573 satisfied customers
2000 frontier: dtc 325 knock sensor fault..idle timing advance..acts
2000 frontier has dtc 325 knock sensor fault wont idle timing advance is all over the place acts like a mass air sensor.39616.7435168634… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,704 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

991 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

648 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,929 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

662 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x