Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
I have a 2001 Nissan Xterra I was driving down the
I have a 2001 Nissan Xterra I was driving down the interstate but I forgot my car was in second gear and it was revving up real high and when I went I switched it into drive but then the car died on m… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
35,964 satisfied customers
Started idling rough when it got below zero outside blinking
started idling rough when it got below zero outside blinking service engine soon light ran fine after warmed up drove 300 miles. ran fine. next morning idled rouph again. went on for month or so then … read more
Roy Sheidenberger
Roy Sheidenberger
12,854 satisfied customers
My mechanic says the van has jumped timing? 150000 miles not
engine is running fine - revs etc - doesnt go into gear… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
My truck died on the road. Sounds terrible when I tried to
My truck died on the road. Sounds terrible when I tried to start it. My buddy said sounds like the timing belt. I'm scared I've done engine damage. If the timing belt broke is there any hope the engin… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
I have a 2005 Nissan frontier 4.0 I'm working on for a
Hello I have a 2005 Nissan frontier 4.0 I'm working on for a buddy. Did timing chain with tensioners and water pump, radiator, driver cat. Thermostate was already done. I did the chains and it started… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
650 satisfied customers
Frontier: I have a 2001 Nissan Frontier 3.3L V6. It got to
I have a 2001 Nissan Frontier 3.3L V6. It got to be difficult to start a couple of days ago, and when it finally started it ran very erratic, and a strange sound was coming from the engine. It quit ru… read more
Rick
Rick
Master Technician (Team Leader)
Vocational, Technical or Trade Scho
503 satisfied customers
frontier: my 2003 nissan frontier is idling low and the po505
my 2003 nissan frontier is idling low and the po505 code is on and this after doing many repairs, truck idled fine before I took it apart. What should I check next?… read more
Jake
Jake
6,640 satisfied customers
Nissan/Datsun Frontier XE: I have a nissan frontier xe 2003.
I have a nissan frontier xe 2003. Ive been having trouble starting it. When I push in the clutch and turn the ignition nothing happens. It takes several attemps before it starts and when it does I hea… read more
Ryan
Ryan
Master Infiniti Tech
Associate Degree
1,422 satisfied customers
i have a 2001 Nissan Frontier, v-6, two wheel drive. i was
i have a 2001 Nissan Frontier, v-6, two wheel drive. i was driving down the road and the engine cut off. a mechanic told me (without pulling the heads) that i was going to have bent valves as well as … read more
AMD
AMD
Master Automobile Technician
Vocational, Technical or Trade Scho
2,632 satisfied customers
2001 Nissan Frontier xe: 3.3L..loud..I lost power..new motor
I have a 2001 Nissan Frontier XE 3.3L 5-speed manual transmission with 176K. I was driving on the hwy and heard a loud "pop". I lost power immediately - the mechanic said the timing belt broke & I nee… read more
Eric
Eric
50,809 satisfied customers
2000 nissan frontier: CHECK ENGINE..THE FUEL PUMP HAD GONE OUT DUE
I HAVE A 2000 NISSIAN FRONTIER CREW CAB 2X4. MY TRUCK SHUT OFF WHILE DRIVING WITH NO WARNING OR CHECK ENGINE LIGHT. I BELIEVED THE FUEL PUMP HAD GONE OUT DUE TO NOT HEARING IT TURN ON WITH THE KEY TUR… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
35,964 satisfied customers
2000 nissan xterra: 3.3L v6 sfi sohc 12V...driving down..me sounded
we have a 2000 nissan xterra. 3.3L V6 SFI SOHC 12V. What happened was yesterday we were driving down the road going maybe 45 at most and then I heard what to me sounded like when you slap a belt toghe… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
2000 nissan frontier: distributor pin..crank..broken cam or what
2000 nissan frontier distributor pin is not turning when you crank the engine is it a broken cam or what… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
35,964 satisfied customers
im driving down the road and the car s rpm..few seconds..timing belt
okay so im driving down the road and the car's RPM'S drop to 0, the steerig jogs for a few seconds and had no gas peddle response. once i slowed it down and got pulled into the parking lot it then spu… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
35,964 satisfied customers
2000 Frontier: v6..fuel pump, distributor..Timing Chain
I have a 2000 Frontier 3.3L v6, I was almost at my home when suddenly the engine stopped working i tried to start the engine again and nothing,i thought the problem was fuel pump, distributor or even … read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,760 satisfied customers
my 2001 NIssan Frontier engine, a 3.3L , has died. It just
my 2001 NIssan Frontier engine, a 3.3L , has died. It just slowed down from 75 mph to 20 mph and stopped. A Nissan expert convinced me that it was the distributer and $300.00 later it still is not run… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
35,964 satisfied customers
2000 frontier: valves..bent pistons smashed and cams look pretty rough
i have a 2000 frontier with a 3.3 engine in it. the timing belt broke and i have the engine pretty much all apart. it looks like the valves are bent pistons smashed and cams look pretty rough. i am lo… read more
Jim B
Jim B
AAA Approved Shop Owner
High School or GED
1,257 satisfied customers
2000 nissan frontier: accelerating right..about 2000 rpms
i have a 2000 nissan frontier and it is not accelerating right. when i floor it, it doesnt go over about 2000 rpms and it just slowly gains speed. any ideas why?… read more
Roy Sheidenberger
Roy Sheidenberger
12,854 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,157 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

35,964 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

727 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

93 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x