Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Nissan Questions
2006 Nissan Pathfinder... Slip dash indicator came on. The
2006 Nissan Pathfinder... Slip dash indicator came on. The tie rods on driver's front went out recently and just replaced them. Is this related or a separate issue? Please help diagnose issue.… read more
Jake
Jake
4,445 satisfied customers
I have a vibration on a 98 Pathfinder when I turn left at
I have a vibration on a 98 Pathfinder when I turn left at higher speeds on highway. I can feel the right front vibrating. Just started. Only does it when I turn to the left. Turning right is smooth no… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
2005 Nissan quest minivan first i had to replace outer tie
2005 Nissan quest minivan first i had to replace outer tie rods did that,set toe in to 3/4 on both sides. now vehicle squeaks when i drive, also when i make a turn the wheel seems to shift like it wan… read more
Clayso
Clayso
Shop Owner Master Technician
ASE Master Certified Automobile Technician
879 satisfied customers
I have a 2006 murano with about 150,000. Tires are a little
I have a 2006 murano with about 150,000. Tires are a little taller and wider, no low profile. Replaced shocks and struts at about 130,000. Was getting a lot of road noise on rough road and overal roug… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
Quest: Hi. I have a 2005 Quest with 55,000 miles on it. Original
Hi. I have a 2005 Quest with 55,000 miles on it. Original owner. No accidents. For the last year or so I have had a bouncing in the steering wheel that occurred above 58 mph or so and sometimes would … read more
Jake
Jake
4,445 satisfied customers
Nissan/Datsun Quest S: can you send me the instructions on
can you send me the instructions on how to remove and install the front and rear struts and torque specs for a 04 Quests?… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
4,493 satisfied customers
1997 nissan pathfinder se: im driving..rough roads..clicking sound
I have a 1997 nissan pathfinder se model and it sways from side to side when i'm driving over bumps and rough roads and i hear a clicking sound sometimes when turning… read more
jpaug01
jpaug01
technician
Vocational, Technical or Trade Scho
427 satisfied customers
1997 Pathfinder: Front-end..tie rod ends, ball joints, bushings..tight
Hi, just picked up a used 1997 Pathfinder 2WD. Front-end feel a little sloppy, so was looking at tie rod ends, ball joints, bushings, etc. All looks good and feels tight in terms of any movement using… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
22,013 satisfied customers
2002 pathfinder: has clunking..cracked..bushings..lower control arm
2002 pathfinder has clunking in front suspension, where should i begin my search? am somewhat familiar with my cars front suspension but not the pathy's. Should i be looking for the lower ball joints … read more
Roy
Roy
Vocational, Technical or Trade Scho
5,454 satisfied customers
2006 maxima: my front and rear struts/shocks..SE...Bearings
HI, just changed my front and rear struts/shocks on my 2006 Maxima SE. Also changed the front STRUT Bearings with new ones. I am using KYB-Gr2 Gas struts. I seem to have a noise coming from the front … read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
22,013 satisfied customers
2000 Pathfinder: uneven roads at speeds..steering..front struts
I have had a problem recently with my 2000 Pathfinder swaying on uneven roads at speeds above 45mph. This is almost the sensation of losing control of the steering. The front wheel bearing have been r… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
22,013 satisfied customers
2000 Nissan Pathfinder: shocks..Front end..bearings..103,000 miles
I am having the following done to my daughters car: 1) Replacing CV Joints 2) Replacing links on torsion bar 3) Replacing struts and shocks with lifetime Tenneco equipment (only pay labor in the futur… read more
Eric
Eric
Retired
N/A
33,577 satisfied customers
1996 Nissan Altima: knocking..front tire bearings..rack..struts
I have a 1996 Nissan Altima and have been hearing a warbling sound while driving at low and high speeds and a knocking or poping noise when making hard turn to left. Have had front tire bearings, both… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
22,013 satisfied customers
97 maxima gle: highway speeds..old half shafts..steering rack
I just bought a 97 maxima gle and the steering feels very stiff. Also at highway speeds the car wants to pull either left or right and hard to keep straight. Would old half shafts cause this, or would… read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
4,493 satisfied customers
2004 Altima: power steering..slowly..high speeds ( on highway)
My 2004 Altima power steering has been getting harder to turn when the car is stopped or moving slowly. At high speeds ( on highway) seems to be ok.… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
200 nissan xterra: sterring wobble or vibration..50 mph it shakes
i have a 200 nissan xterra 4 by 4 3.3 liter v6 and about a month ago i have a sterring wobble or vibration its not always there. In between curves going 40 to 50 mph it shakes. Now while holding the c… read more
AutoTech08
AutoTech08
Workshop owner
Vocational, Technical or Trade Scho
676 satisfied customers
2002 Nissan Sentra: 55 to 60 mph and the steering wheels also shakes
I have a 2002 Nissan Sentra GXE. The wheels start shaking at 55 to 60 mph and the steering wheels also shakes at that speed. Other than that it drives ok. It does not click when I make sharp turns. Th… read more
Roy
Roy
Vocational, Technical or Trade Scho
5,454 satisfied customers
1997 Nissan Pathfinder: speeds over 50 mph..accelerate..comes back
I have a 1997 Nissan Pathfinder that has developed a swaying at speeds over 50 mph. I can accelerate or slow to stop the sway but it comes back and is uncomfortable. I have replaced front struts and r… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,482 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

747 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

602 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

161 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,482 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

589 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x