How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike V. Your Own Question
Mike V.
Mike V., Nissan Technician
Category: Nissan
Satisfied Customers: 25677
Experience:  Nissan factory trained and Certified Subaru Technician.
2921078
Type Your Nissan Question Here...
Mike V. is online now
A new question is answered every 9 seconds

NISSAN PATHFINDER: 2006, 4.0, SE, V6..CRANKSHAFT SENSOR..SCHEMATIC

Resolved Question:

I HAVE A NISSAN PATHFINDER, 2006, 4.0, SE, V6. I NEED TO KNOW HOW TO CHANGE THE CRANKSHAFT SENSOR, WHERE IS IT LOCATED, AND A SCHEMATIC OR DIAGRAM.
Submitted: 7 years ago.
Category: Nissan
Expert:  Mike V. replied 7 years ago.
HI there! HERE is a diagram of the engine sensor locations. The crank sensor is located on the drivers side rear of the engine. It is tough to get to and normally has a bracket in the way. Once the bracket is out of the way,there is only a 10 mm bolt holding it in place. All you have to do is change the sensor,there are no adjustments needed. Hope this helps!
Mike V. and 4 other Nissan Specialists are ready to help you