How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim West Your Own Question
Tim West
Tim West, ASE Certified Technician
Category: Nissan
Satisfied Customers: 4638
Experience:  Just Answer Car Expert ASE Certified Service Manager
Type Your Nissan Question Here...
Tim West is online now
A new question is answered every 9 seconds

2001 nissan maxima: no power,replaced maf sensor..idle problem..iac

Resolved Question:

2001 nissan maxima just bought.the car had no power,replaced maf sensor,fixed problem,now idle problem with code po505, replaced iac problem still there.thanks for any info
Submitted: 7 years ago.
Category: Nissan
Expert:  Tim West replied 7 years ago.
Thanks for visiting
Check the resistance of the IAC valve windings, the specification is approximately 22 ohms for all windings. If any of the circuits test open or show very low resistance, replace the IAC. Inspect the ECM for being burned internally, in most cases the IAC damages the ECM and both components have to be replaced. After repairs are made, perform the Idle Air Volume Learning Procedure. In some cases the ECM may be covered by the 8 year 80,000 mile emissions warranty.
Tim West and 2 other Nissan Specialists are ready to help you