How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roy Your Own Question
Roy, ASE Certified Technician
Category: Nissan
Satisfied Customers: 5455
Experience:  Nissan Master technician
Type Your Nissan Question Here...
Roy is online now
A new question is answered every 9 seconds

2003 Nissan Maxima: I twas recently backed

Resolved Question:

2003 Nissan Maxima stalls while driving. Then can be restarted after a short time. I twas recently backed into in the rear quarter panel. So could this be an inertia switch gone bad?
Submitted: 8 years ago.
Category: Nissan
Expert:  Roy replied 8 years ago.



Your car could need a new crank sensor or a reprogram for the crank sensor there is a bulletin for a reprogram for your control unit at the dealer , call the dealer and see if your car is covered for the reprogram, this should fix your stalling problems , Thank You, XXXXX XXXXX know if you have any more questions, ROY!

Roy and 3 other Nissan Specialists are ready to help you