Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
I have a 2007 Nissan Sentra 2.0L and I have no clue what is
Hi I have a 2007 Nissan Sentra 2.0L and I have no clue what is wrong with it. I would first like to say that I have already replaced the Battery, Intake Hose, and Mass Air Flow Sensor and the problem … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
11,495 satisfied customers
It will only rev to 2000 rpm in reverse and drive and does
It will only rev to 2000 rpm in reverse and drive and does not move but it will rev up in park or neutral … read more
Roy Sheidenberger
Roy Sheidenberger
9,077 satisfied customers
Getting code c1130 happened when I changed mass air flow
Getting code c1130 happened when I changed mass air flow sensor, and it had a bent pin so I switched back to the old one … read more
Marc
Marc
Mechanic
Associate Degree
1,708 satisfied customers
My 2000 nissan sentra keeps stalling and shutting off
My 2000 nissan sentra keeps stalling and shutting off .....but it will turn back ...when it does that it all the lights come on the oil , engine light, etc. idk what it is i keep getting its the mass … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,324 satisfied customers
Throwing mass air flow sensor code. Engine has not stalled.
Engine has not stalled. But there is hesitation when acceleraring. I 1st cleaned the maf sensor and cleared the code. Drove for about 700 miles code didnt return but still jerky acceleration and rough idle. I then replaced the maf sensor with a duralast one and the car imediately went into limp mode with vdc and slip off lights and ses light returned … read more
Gunvir Singh
Gunvir Singh
1,949 satisfied customers
P01130 says the lady at the auto shop I have a 2005 Nissan
P01130 says the lady at the auto shop I have a 2005 Nissan Maxima v6 … read more
Expert
Expert
7,468 satisfied customers
Altima: Nissan altima 2013 - In the past few days, upon initial
Nissan altima 2013 - In the past few days, upon initial startup for the day I've had instances of hesitation as/if the car was going to stall Today I have the malfunction indicator light on steady. An… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,976 satisfied customers
2002 nissan maxima: stop light...it..accelerator..restart..new battery
i have a 2002 nissan maxima and my nissan is giving me a hard time....its been hesitating when starting for about a week and now just today it just shuts down when i come to a stop light...it doesn't … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,976 satisfied customers
95 2.4L P.U.Upon acceleration..RPM..cap..hesitation
95 2.4L P.U. Upon acceleration, at consistently the same RPM, approx 3200, I am experiencing hesitations in power that seem to disappear at around 3600. It seemed to start about the time I replaced pl… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
22,422 satisfied customers
2000 Maxima: Initial cold start, engins revs..sputters..only happens
Have a "cold" start problem with my 2000 Maxima GLE. Initial cold start, engins revs to 3000rpm, then drops to 1500 to within minutes sputters down to eventually shut off. This only happens on a cold … read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,976 satisfied customers
2000 Nissan Maxima SE: cuts..rpm..1 hr diagnostic fee..car started
I am having a problem with my 2000 Nissan Maxima SE 3000 V6..car hardstarts will not run @ Idle when you get it warm it will Idle alright but when you go to give it gas it cuts out .... Almost like it… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
9,976 satisfied customers
2000 Nissan Maxima: hesitates..accelerating..Mass Air Flow Sensor
2000 Nissan Maxima hesitates when accelerating. Replaced Mass Air Flow Sensor with remanufactured on. Now also break light is on. What can it be?… read more
Jay
Jay
Nissan Technician
Vocational, Technical or Trade Scho
25,990 satisfied customers
1994 Nissan Maxima: serviced..limp mode, where it stalls..sluggish
Regarding a 1994 Nissan Maxima 32 valve. Car has been well cared for and serviced frequently. Currently sometimes, not all the time, when driving it goes into, what I call, limp mode, where it stalls … read more
Roy Sheidenberger
Roy Sheidenberger
9,077 satisfied customers
95 nissan maxima: intermittently..fuel filter..fuel pressure at 30 psi
95 nissan maxima stalls intermittently, starts right back up, fuel filter changed, fuel pressure at 30 psi idle, no change when engine stalls.… read more
Paul M ASE Master
Paul M ASE Master
Automotive College
6,083 satisfied customers
1997 nissan maxima: i push the pedal..accelerate..drove..car started
i have a 1997 nissan maxima and i recently had purchased a airflow sensor for my car and im still having problems with my car heistating and when i push the pedal to the floor the car takes forever to… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
25,791 satisfied customers
2001 Nissan maxima: SE...engine compartment was the air filter
Hi I have just finished doing a complete front end work and front end aligfnment on a 2001 Nissan Maxima SE. The only thing I changed in the engine compartment was the air filter. Now the rpoblem is t… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
95 Nissan Maxima: a V6 engine 106,000 miles that..running rough..idles
I have a 95 Nissan Maxima with a V6 engine 106,000 miles that has been periodically slow to start. Recently, it started to occur more frequently and now it is running rough when it idles. It seems to … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
22,422 satisfied customers
mirage: cold to warm engine, acceleration causes porposing..throttle
Recently, at cold to warm engine, acceleration causes porposing. It goes hesitates goes hesitates until the throttle is released and eased into. Seems that the gas milage is lower than normal also. Wh… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
669 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,000 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

9,976 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

669 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

92 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x