Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
Is a cv axle the same as a cv joint? 2006 Nissan Maxima 6
I was told that the clicking I here was from my cv joint. Then I went to the dealership and they wrote that they recommend the replacement of my strut, mount, and insulators. I later purchased tires and that shop said I should replace my front quick struts(plural) and my front cv axles(plural). are these the same items just different terminology. And how expensive should this be approximately? … read more
Clifton B.
Clifton B.
nissan master auto tech
Associate Degree
5,464 satisfied customers
There is a sound coming from left front wheel,i have changed
there is a sound coming from left front wheel,i have changed bearing and a hub but still sound comes out.there is no sound when I turn to the left … read more
Expert
Expert
10,508 satisfied customers
2000 nissan xterra cv boots are split open on both sides do
2000 nissan xterra cv boots are split open on both sides do i replace boot or whole cv axle assembly? steering wheel pulsating back and forth vehicle pulling to right when releasing steering????… read more
Ron Z.
Ron Z.
Vocational, Technical or Trade Scho
24,401 satisfied customers
Altma: I have change motor mount cv joint , but I still hear
I have change motor mount cv joint , but I still hear scrubbing when I put the car in reverse, and move back quickly. It is a 1999 Nissan altma GXE.… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,773 satisfied customers
on my 1996 4wd pathfinder the front driveshaft has a rubber
on my 1996 4wd pathfinder the front driveshaft has a rubber seal of some kind near the driver side of the axle it has a tear in it. first of all what is it and what do i have to do to get it repaired… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
7,678 satisfied customers
98 maxima: a locking, a friend checked the vin#..Infinity..fitting
I just installed a used transmission in a 98 maxima have now figured out that I asked for a non locking and this one is a locking, a friend checked the vin# XXXXX it is actually out of a Infinity I30,… read more
jpaug01
jpaug01
technician
Vocational, Technical or Trade Scho
427 satisfied customers
95 Nissan Maxima GLE: Automatic..cv..drivers side..joint assembly
I have a 95 Nissan Maxima GLE Automatic with a RE4F04A transaxle. How do you change the CV boots left and right side? I started on the driver's side with joint assembly pulled from knuckle. The old bo… read more
jpaug01
jpaug01
technician
Vocational, Technical or Trade Scho
427 satisfied customers
92 nissan maxima: the rpm quage and the odometer isntworking what
i have a 92 nissan maxiam and the rpm quage and the odometer isn'tworking what is the problem and how to fix it… read more
normanahoyt
normanahoyt
Owner/technician/manager
Bachelor's Degree
367 satisfied customers
2000 Nissan: 4X4..Frontier..right turn..the cv joints, if its leaking
I'll try again, I have a 2000 Nissan 4X4 Frontier, when I turn left or right or on a winding road I hear a popping sound. I turn left popping sound comes out of the r/wheel area vis versa for the righ… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,773 satisfied customers
1993 nissan altima: lower control arm..the cv joint?? any help
i am having trouble getting the lower control arm on my 1993 nissan altima to come off so i can replace the cv joint?? any help??… read more
Ryan
Ryan
Master Infiniti Tech
Associate Degree
1,422 satisfied customers
Nissan ALtima: 000 miles..clunking/knocking noise coming..front end
I have a 05 Nissan ALtima with 140,000 miles. I have had a clunking/knocking noise coming from the front end and/or motor for several months. I just recently took it to a mechanic who fixed the follow… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
650 satisfied customers
nissan pathfinder: steering wheel..2000 model..driving on rough roads
I have a big steering wheel gap on my nissan pathfinder 2000 model. It makes the vehicle move in a twist manner whenever I am driving on rough roads. What should I do.… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,773 satisfied customers
05 nissan quest: rpm guage fluctuates when the vibration occurs..van
i have an '05 nissan quest with 120,000kms and the transmission shakes at approx 60km/h or inbetween 1500-2000 rpms. the rpm guage fluctuates when the vibration occurs.... shakes the entire van… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,997 satisfied customers
1997 pathfinder: I engage the 4 wd..steering starts to wander..in town
When I engage the 4 WD on my 1997 pathfinder, the steering starts to wander back and forth. It is fine in 2WD. Can you suggest something I can get checked. We do not have a Nissan dealer in town.… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
650 satisfied customers
developed a vibration at about 2000 rpm...faster you go..New tires
I have developed a vibration at about 2000 rpm. Seems to disapear the faster you go. New tires didn't have any effect. Vehicle is an 03 Nissan frontier crewcab 4x4. Vibration is worse in cold weather.… read more
Roy Sheidenberger
Roy Sheidenberger
12,882 satisfied customers
Nissan Sentra SE R: spec..2 years ago on the front right tire..axle
I have an 04 Nissan Sentra SE R spec V. I hit a curb about 2 years ago on the front right tire. I recieved a new axle etc. My car is now making a creaking noise when I turn the wheel left and right. I… read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
93 satisfied customers
1997 nissan maxima: that wont start..starter..relay..check fuses
I have a 1997 Nissan maxiam that won't start. I have change battery (new), replace starter, and exchange the inhibitor relay and check fuses and everything looks good. What is my next course of action… read more
Shimell
Shimell
Team Leader/ Master technician
Vocational, Technical or Trade Scho
363 satisfied customers
Nissan Maxima: CV Joints..the steering was loosened..probelm
Ever since I replaced the CV Joints for my Nissan Maxima 2000 last week, the steering was loosened. I was just wondring what excately is the probelm?… read more
Infiniti Nissan Specialist
Infiniti Nissan Specialist
Master Technician
Vocational, Technical or Trade Scho
915 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,157 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

10,242 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

727 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

93 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x