How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roy Your Own Question
Roy, ASE Certified Technician
Category: Nissan
Satisfied Customers: 5455
Experience:  Nissan Master technician
Type Your Nissan Question Here...
Roy is online now
A new question is answered every 9 seconds

I have a 1995 Nissan Quest VAN. How do I adjust the gear shift

Resolved Question:

I have a 1995 Nissan Quest VAN. How do I adjust the gear shift? A screw fell out of the steering column and now I can not get into park and can only start the van by hunting for neutral. The screw is about 1.5 inches long and a round tip on the threaded end and a large round head. I've looked and can not see were the screw came from.
Submitted: 8 years ago.
Category: Nissan
Expert:  Roy replied 8 years ago.



The shifter has screws that tighten the arm they become loose and fall out , they have a torx head bolt, you will have to look under the dash the shifter mounts to the column wiggle the shifter and look where it mounts this is where the bolt goes.

let me know if you have more questions, ROY!graphic
Roy and other Nissan Specialists are ready to help you
Expert:  Roy replied 8 years ago.
here is a better pic of the bolts thst come loose Thanks ROY!graphic