Nissan

Nissan repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Nissan Questions
Have an 04 nissian quest. noticed a noise coming from front
have an 04 nissian quest. noticed a noise coming from front drives side when I let off of the gas. raised it up and it appears that the cv axle where it enters the transaxle is loose. i am also having… read more
Ted G.
Ted G.
Owner
Vocational, Technical or Trade Scho
5,692 satisfied customers
quest: 2006 Nissan quest drive noise. I have a steady revolution
2006 Nissan quest drive noise. I have a steady revolution sound that at times seems to be felt in brakes but not a shake or vibration in brakes and wheels.started road noise issue with brakes, hub ass… read more
Internal88
Internal88
Bachelor
5,346 satisfied customers
2006 nissan: 2006 Nissan quest has what I assume is an inner
2006 Nissan quest has what I assume is an inner cv joint(driver side) issue. makes a rhythmic knocking noise. Vehicle has new brakes, new front hub assemblies, and new tires as well as recent alignmen… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
38,219 satisfied customers
Nissan Quest: 1998 Nissan Quest 125k miles:Problem:Runs
1998 Nissan Quest 125k miles: Problem: Runs smoothly up to 60 miles, then something causes it to wobble as if a badly out of balanced tire between 60 -70 mph. Entire body shakes. Had wheels balanced\r… read more
Jake
Jake
6,645 satisfied customers
Nissan/Datsun Nissan Quest: I have a problem with my 2004 Quest.
I have a problem with my 2004 Quest. Beginning at about 45 MPH, it begins to "shimmy" and worsens as speed increases. I have had tires balanced numerous times without success; last week my serviceman … read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,997 satisfied customers
2002 Altima: I replaced a strut..inner cv joint..I rotated the wheel
I replaced a strut on a 2002 Altima. In the process, the inner CV joint pulled out. I rotated the wheel and when the boot was not distorted I shoved it back in. Car seemed to be OK when I drove it aro… read more
Eric
Eric
50,893 satisfied customers
1995 Nissan Maxima: new halfshaft axle..have a spline alignment tool
I am getting ready to remove and install a new halfshaft axle on the front of my 1995 Nissan Maxima. The manual that I have looked at said not to install the halfshaft if I don't have a spline alignme… read more
Eric
Eric
50,893 satisfied customers
2004 NISSAN QUEST: OWNER HAS HAD BRAKES AND ROTORS replaced..cv JOINTS
2004 NISSAN QUEST, OWNER HAS HAD BRAKES AND ROTORS REPLACED TWICE. CKED THE WHEEL BEARINGS AND CV JOINTS, THEY ARE ALL TIGHT. WHEN YOU BRAKE THERE IS A PULSATING LIKE A ROTOR OR A WHEEL BEARING AND A … read more
jpaug01
jpaug01
technician
Vocational, Technical or Trade Scho
427 satisfied customers
2004 Nissan Frontier XE: left turn..loud../ grinding noise..CV joint
I own a 2004 Nissan Frontier XE truck. If I make a sharp/hard left turn you hear a loud clanking / grinding noise - is this my CV joint?… read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
Rear tires..the CV Joints are bad because of the clicking noise
What would practically shave the rear tires while driving ... I know that the CV Joints are bad because of the clicking noise but would that also cause the unusual wear on the rear tires?… read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
i have a 04 nissan quest. i need to replace the front wheel
i have a 04 nissan quest. i need to replace the front wheel bearing. how do you go about getting the old one off.… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
16,080 satisfied customers
2000 Nissan Quest: cv axles replaced..brake pads..knocking sound
I have a 2000 Nissan Quest. Recently I had both CV axles replaced as well as brake pads. Now when I brake from moving about 35 mph, it (inconsistently) make a knocking sound on the front right. The me… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,997 satisfied customers
20002 G20: right front..intermittent vibration..tires
My 20002 G20 has right front "pop" or click when turning right or backing up and turning and vibration at intermittent vibration at 40mph and above. New tires have not addressed the probem. What might… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
05 nissan quest: rpm guage fluctuates when the vibration occurs..van
i have an '05 nissan quest with 120,000kms and the transmission shakes at approx 60km/h or inbetween 1500-2000 rpms. the rpm guage fluctuates when the vibration occurs.... shakes the entire van… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,997 satisfied customers
2000 Nissan Pathfinder: shocks..Front end..bearings..103,000 miles
I am having the following done to my daughters car: 1) Replacing CV Joints 2) Replacing links on torsion bar 3) Replacing struts and shocks with lifetime Tenneco equipment (only pay labor in the futur… read more
Eric
Eric
50,893 satisfied customers
1998 nissan maxima: speeds..changed the brakes and rotors..alignment
My 1998 nissan maxima has started shuddering when I brake at speeds higher than 45 mph. I have changed the brakes and rotors, had the alignment checked, had the tires rebalanced, and checked the cv jo… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,776 satisfied customers
2005 Frontier: mph..Recently replaced all Brakes/Rotors..tires
I have a Nissan 2005 Frontier 4wd Crew Cab. Vibration which seems to be in the front of the vehicle, occurs between 65 to 85 MPH most prominently beween 75 and 80. Recently replaced all Brakes/Rotors,… read more
Mike V.
Mike V.
Nissan Technician
Subaru and Nissan factory training.
10,242 satisfied customers
my oil change and the mechanic mentioned my cv axle was going bad
Just got my oil change and the mechanic mentioned my cv axle was going bad. Can someone explain to me the purpose of the cv axle and what should I ask when calling a mechanic to replace it? Thanks, Li… read more
Jay
Jay
Shop Forman / Lead Tech
Vocational, Technical or Trade Scho
27,776 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

cjazLexington, KY

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Chris(aka-Moose)

Chris(aka-Moose)

Nissan Technician

1,157 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

650 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Marty

Marty

ASE Certified Technician

203 satisfied customers

ASE & Bosch master tech. 30 years experience.

Mike V.

Mike V.

Nissan Technician

10,242 satisfied customers

Nissan factory trained and Certified Subaru Technician.

Ron

Ron

ASE Certified Technician

727 satisfied customers

34 years of automotive Repair

Anthony

Anthony

ASE Certified Technician

332 satisfied customers

ASE Master Automobile Technician with over 18 years exp. in this field.

Richard

Richard

ASE Certified Technician

93 satisfied customers

Nissan Tech ASE certified technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x