How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Infiniti
Satisfied Customers: 35843
Experience:  35 year as a ASE Tech
Type Your Infiniti Question Here...
Ron is online now
A new question is answered every 9 seconds

Low beam headlights not working, in auto or on/off state?

Customer Question

low beam headlights not working, in auto or on/off state?
JA: Have you checked the fuses? Have you checked the bulbs?
Customer: no, where would the fuse be and is there a separate fuse for low beam and high beam?
JA: What is the model/year of your Infiniti?
Customer: both sides are out so I cant believe it's the bulbs? it's a 2006 Infiniti M45 and it's very foggy to day so I don't know if that is playing into this?
JA: Are you fixing your M45 yourself? What have you tried so far?
Customer: nothing at this point, yes I would like to fix it myself if possible
JA: Anything else you want the mechanic to know before I connect you?
Customer: Not sure?
Submitted: 10 months ago.
Category: Infiniti
Expert:  Ron replied 10 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 10 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here. There are two separate fuses for the low beams both located in the under hood fuse panel so start with checking these first. See the wiring diagram enclosed in the link below for testing reference.

If the fuses check okay then try running the pinpoint test steps in this link.