How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Infiniti Mechanic
Category: Infiniti
Satisfied Customers: 20963
Experience:  Line Mecahnic, Electronics, Sales & Service 30 years
Type Your Infiniti Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Where is the MAF sensor to clean in an M45 2006

Customer Question

Where is the MAF sensor to clean in an M45 2006
Submitted: 1 year ago.
Category: Infiniti
Expert:  Don 'Mo Lurch' replied 1 year ago.


sorry for the delay............
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”

click Attachment below

IF you need more information, please ask "prior" to Rating.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
Rating is very Important to our Service

Customer: replied 1 year ago.
P1217 Manifactor control fuel air metering
Problem for an 2006 M45 infinity
Customer: replied 1 year ago.
The mass flow sensor has been removed but then what? clean with?? Spray?? Replace?
Expert:  Don 'Mo Lurch' replied 1 year ago.

sorry for the delay.......NO Internet

Your question was:
Where is the MAF sensor to clean in an M45 2006

My answer was specific to the location & removal

I would not be able to tell you to "replace", unless I physically see it
Cleaning: Many Auto Parts Stores sell products similar to Spray Carb Cleaner but is for MAF's

Remove & inspect & if looks ok, clean & reinstall
Don't scrub the parts; you may break the wire or damage the plate.
Allow the MAF sensor to dry completely before reinstalling it in the air duct

Otherwise Replace

Expert:  Don 'Mo Lurch' replied 1 year ago.

Hello again Lurch here.

I noticed we have not yet resolved your concern you asked about.

If I have helped, please RATE my answer

I would appreciate it if you would reply so I can offer my skills and knowledge and repair guide access to help as best I can.

If you have already rated my answer, then Thanks alot.

If you have new questions now or in the future please do not hesitate to ask them.

If you would like me to assist you. Just bookmark this page so you can access my profile easy and post a new question from the question box on my profile page.