How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jay Your Own Question
Jay, Certified Infiniti Technician
Category: Infiniti
Satisfied Customers: 20061
Experience:  20+years, Nissan and Infiniti experience and currently now working for a Infiniti Dealer
Type Your Infiniti Question Here...
Jay is online now
A new question is answered every 9 seconds

Infiniti g35: to JAY INFINITI i am a honda tech i just got

Customer Question

to JAY INFINITI i am a honda tech i just got this car i performed a continuity check and all wires are good from ecm to throttle i cleaned the throttle out and reset codes and car was ok for two weeks but had a low idle and i did not do a relearn after i cleaned gthe throttle now the code is back on is it possible if i do the relearn now it would fix it ?
Submitted: 2 years ago.
Category: Infiniti
Expert:  Jay replied 2 years ago.
I replied back to your original Question and gave you the Idle Relearn steps. Please go back to your original Question. you cleaned the Throttle chamber with Throttle chamber cleaner you may have damaged the throttle chamber and that is why your getting TP sensor code codes instead of the P0507 code you get when you need to perform the Idle Relearn. Please review the Answer and steps provided on your original Question and please Reply in your original question.